 |
 |
 |
|
The AWK-5222 dual-RF wireless AP/Bridge/Client provides a flexible and highly reliable solution for your industrial wireless networks. The AWK-5222 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for extended temperature models, and it is built rugged enough for industrial applications. With two independent RF modules, the AWK-5222 supports a greater variety of wireless configurations and applications, and the redundant wireless connections increase the reliability of the entire wireless network. The AWK-5222s two DC power inputs make the power supply more reliable, and it can also be powered via PoE for easier deployment.
Redundancy to Increase System Reliability
Dual DC power inputs and PoE
Redundant dual-RF design for rapid fail-over
Immunity against disconnection caused by radio interference
Loading balance of wireless communication
Advanced Security
64-bit and 128-bit WEP (Wired Equivalent Privacy)
Enable/disable SSID broadcasts
Power filters for access control
IEEE 802.1X/RADIUS supported
WPA/WPA2/802.11i supported
 Data Sheet
| WLAN: |
| Standards |
IEEE 802.11a/g/b for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3u for 10/100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP |
| Spread Spectrum and Modulation (typical) |
DSSS with DBPSK, DQPSK, CCK
OFDM with BPSK, QPSK, 16QAM, 64QAM
64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps, QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1 Mbps |
| Operating Channels (central frequency) |
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels) |
| Security |
SSID broadcast enable/disable
Firewall for MAC/IP/Protocol/Port-base filtering
64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES) |
| Transmission Rates |
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| TX Transmit Power |
802.11b:
Typ. 18±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps
802.11a:
Typ. 16±1.5 dBm @ 6 to 24 Mbps, Typ. 14±1.5 dBm @ 36 to 48 Mbps, Typ. 13±1.5 dBm @ 54 Mbps |
| RX Sensitivity |
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps |
| Protocol Support: |
| General Protocols |
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, RTP ,PPPoE, DHCP |
| AP-only Protocols |
AP-only Protocols: ARP, BOOTP, DHCP, dynamic VLAN-Tags for 802.1X-Clients, STP/RSTP (IEEE 802.1D/w) |
| Interface: |
| Default Antenna |
2 dBi, dual-band omni-directional antenna, RP-SMA (male) |
| Alarm Contact |
1 relay output with current carrying capacity of 1 A @ 24 VDC (Digital Output) |
| Digital Inputs |
2 electrically isolated inputs
+13 to +30 V for state 1
+3 to -30 V for state 0
Max. input current: 8 mA |
| System LED Indicators |
PWR1, PWR2, PoE, FAULT, STATE, WLAN1, WLAN2, 10M, 100M |
| LAN Port |
10/100BaseT(X) auto negotiation speed (RJ45-type) |
| Connectors for External Antenna |
RP-SMA (female) |
| Console Port |
RS-232 (RJ45-type) |
| Power Requirements: |
| Input Voltage |
12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant) |
| Reverse Polarity Protection |
Present |
| Physical Characteristics: |
| Housing |
Metal, IP30 protection |
| Weight |
880 g |
| Dimensions |
62.05 x 135 x 105 mm (2.44 x 5.31 x 4.13 in) |
| Installation |
DIN-Rail mounting (standard), Wall mounting (optional) |
| Environmental Limits: |
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5% to 95% (non-condensing) |
| Regulatory Approvals |
| Safety |
EN60950-1(pending), UL60950-1 |
| EMC |
EN301 489-1/-17, FCC Part 15 |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
IEEE 802.11a/b/g compliant
Redundant power inputs and PoE
Higher security with WEP/WPA/WPA2/802.11X and powerful filters
Turbo Roaming for seamless wireless connections
Dual-RF design for redundant wireless communication
|
|
|
|
|
|
|
|
|
