|
|
|
|
Perle’s Ethernet I/O technology (IOLAN SDS I/O Device Server) enables secure access and control of remote digital I/O, analog I/O, pulse I/O, relays and temperature sensors as well as secure connections of remote serial equipment on any IP network. The IOLAN SDS I/O has the ability to monitor environmental alarms, intrusion detection, relay contact closures and equipment failure. Through remote operator or application control, opening and closing of integrated relay contacts or activation of digital output signals can be incorporated into any response of a critical event.
Management, Monitoring and Control of High-Value Distributed I/O Assets
The monitoring and protection of high-value distributed I/O assets involves more than simple secure access to its data, it also involves the protection and control of its physical environment along with the ability to take corrective action when necessary. Digital and analog sensors, proximity and mechanical switches, relays, pushbuttons, temperature and humidity sensors can assist in determining the integrity and security of the asset’s local environment. Information from these sent back to a central support location over a network can help an enterprise react more quickly to an important event or failure. IOLAN SDS I/O Device Servers are ideal for these applications. Secure Ethernet I/O Connectivity
IOLAN
SDS I/O Device Servers enable administrators to securely
acquire information from remote I/O (digital and analog based)
devices across an IP network. Sensitive server data gathering
and control information between SCADA server and remote
I/O is protected through powerful encryption ciphers such
as AES, 3DES, RC4, RC2 and CAST128. Authorized administrative
access to an IOLAN SDS is assured via standard authentication
schemes such as RADIUS, TACACS+, LDAP, Kerberos, NIS and
RSA Security’s SecurID tokens.
Recognized as the most secure method for communicating to
remote private networks over the Internet, the IPSec standard
provides robust authentication and encryption of IP packets
at the network layer of the OSI model. As a standard it is
ideal for multi-vendor interoperation within a network, providing
flexibility and the ability to match the right solution for
a particular application.
Extended Temperature Support
The IOLAN SDS I/O Device Server addresses the need for
connecting remote I/O and serial devices that operate in extreme
temperatures –40C to +74C (-40F to +165F) to an enterprise’s
IP network.
Access I/O Devices over Ethernet using Popular
Central Applications
An IOLAN I/O Device Server is ideal for remote
I/O management
using common SCADA or OPC Servers using Modbus/TCP protocol as well as Network Management Systems ( NMS) utilizing SNMP.
Flexible and Reliable COM/TTY Access to Ethernet
I/O
An IOLAN I/O Device Server is ideal for connecting COM/TTY
based applications such as Modbus ASCII/RTU to remote
I/O devices. Perle’s TruePort
re-director provides
COM port or fixed TTY connections across an IP
network.
An Application Program Interface ( API ) is also available
so that custom applications can be developed to access distributed
I/O channels attached to remote IOLAN I/O Device
Servers. Common serial applications such as Visual Basic
can be used to send IOLAN API commands to remote IOLAN I/O
Device Servers across an IP network. This API is available
for the most popular operating systems today.
Universal I/O
The IOLAN SDS I/O Device Server connects to a wide variety
of distributed I/O devices.
For examples click here.
Universal I/O on IOLAN I/O Device Servers provides
flexibility when used across a wide array of environments.
Individual digital channels can be configured as either inputs
or outputs. Analog Inputs can support a broad range of voltage
or current type devices including industrial grade temperature
sensors such as thermocouples and RTDs.
Models with integated solid state relays can be used to control
remote contact closures.
Automated response to alarm conditions
IOLAN SDS I/O Device Servers have the capability
of measuring input conditions and intelligently alerting
enterprise resources such as central TCP/IP based applications,
Syslog, SNMP or individuals via email. By instantly generating
alerts when pre-defined threshold levels have been exceeded,
alarm notifications can be passed along when needed. This
eliminates the packet based overheads associated with polled
environments.
Rugged Industrial-Grade Design
Compact and protective metal enclosure for wall mount or
DIN rail mounting environments. Industrial grade unit protection
is provided though optical isolation of I/O channels of
2000 Vrms, Ethernet isolation of 1500 Vrms, open/short
detection logic on RTD/Thermocouple inputs and 15,000 volts
electrostatic discharge protection across all serial pins.
Advanced IP Technology
With support for Next Generation IP (IPv6) the IOLAN range
provides organizations with investment protection to meet
this rapidly growing standard.
Lifetime Warranty
The Perle IOLAN SDS is backed by the best service and support
in the industry including Perle’s unique lifetime warranty.
Since 1976 Perle has been providing its customers with networking
products that have the highest levels of performance, flexibility
and quality.
Technical Specs for Perle I/O Device Servers
IOLAN SDS TD4, SDS TA4, SDS TD2R2, SDS TT4, SDS
A4R2, SDS A4D2, SDS D2
Main Processor
- MPC852T, 66 Mhz, 87 MIPS
- 32 MB RAM
- 8 MB Flash
I/O Processor
Network/Ethernet
- 1 x 10/100Mb RJ45
- 1.5 KV magnetic isolation
I/O Connectors
- Removable terminal blocks
Digital I/O
- 2 or 4 channels depending on
model
- software selectable as inputs or outputs
- optical isolation
of 2000V rms
Digital Input
- Dry Contact : Logic 0 = open.
Logic 1= close to GND
- Wet Contact: Logic 0 = 0-3V, Logic
1= 10V-30V
Digital Output
- Open collector to 30V ( source,
sink or both )
- 200 mA max load
- Digital out ( DO ) or pulse mode
Relay
- Form C type SPDT
- Contact rating: 1A@30VDC, 0.5A @AC: 120VAC
- Breakdown
voltage: 500 VAC (50/60 Hz)
- Relay on time: 7 msec; Relay
off time: 3 msec.
- Total switching time: 10 msec.
- Insulation resistance:
1000 MW minimum at 500 VDC
Analog Input
- Channels: 2 or 4 differential
- 16-bit resolution
- lnput range: ±150 mV, ±500 mV, ±1 V,
±5 V, ±10 V,0-20 mA, 4-20 mA
- Optical Isolation : 3000 VDC
- Fault and overvoltage protection:
up to ±35 V
- Sampling rate: 10 samples/sec.
- Input impedance: 20 M Ohm
- Accuracy: ±0.1% or better
- Zero drift: ±5 µV/° C
- Span drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 90 dB min
Thermocouple Input
- Types : J, K, T, E, R,
S, B
- Isolation voltage: 2000 VDC
- Sampling rate: 10 samples/sec.
- Accuracy: ±0.15% or better
- Zero drift: ±5 µV/° C, Span
drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 130 dB
RTD ( Resistance Temperature Detector )
- Channels:
4 differential inputs
- lnput type: PT100, PT1000, Ni 518
- Optical Isolation: 2000
VDC
- Sampling rate: 10 samples/sec
- Accuracy: ±0.05% or better
- Zero drift: ±2.5 µV/° C, Span
drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 130 dB
Protocols
IPV6, IPV4, TCP/IP, Reverse SSH, SSH, SSL, IPSec/IPv4,
IPSec/IPv6, CIDR, RIPV2/MD5,
ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP,
SFTP, SNTP, Telnet, raw, reverse Telnet, MODBus/TCP, LPD, RCP,
DNS, WINS, HTTP, HTTPS, SMTP, SNMPV3, PPP, PAP/CHAP, SLIP,
CSLIP
Security and Authentication
- SSHV1 and SSHV2
- SSL V3.0/TLS V1.0, SSL V2.0
- SSL Server and SSL client mode capability
- IPSec: NAT Traversal, ESP authentication protocol
- Encryption: AES (256/192/128), 3DES, DES, Blowfish, CAST128, ARCFOUR(RC4), ARCTWO(RC2)
- Hashing Algorithms: MD5, SHA-1, RIPEMD160, SHA1-96, and MD5-96
- Key exchange: RSA, EDH-RSA, EDH-DSS, ADH
- X.509 Certificate verification: RSA, DSA
- Certificate authority (CA) list
- Local database
- RADIUS Authentication and Accounting
- TACACS+, LDAP, NIS, Kerberos
- RSA SecureID-agent or via RADIUS
- IP Address filtering
- Disable unused daemons
Management
- Web browser or secure web browser via https (SSL/TLS )
- Windows Server 2003/2008 MS - SAC : GUI access to text-based Special Administrative Console
- Perle DeviceManager software to manage single or multiple device servers
- CLI – Telnet, SSH, shared console port
- Menu
- SNMP, MIB II, Perle MIB, read and write capabilities
- SYSLOG
- Easy Configuration Wizard
- Failsafe mode - Default outputs if loss of communication occurs
- Port Buffering – 256k local, SYSLOG, NFS or 3DES encrypted to NFS server
- Set a personalized factory default for IOLANs
Serial Port (S)
- Software selectable EIA/RS-232/422/485
- DB9M connector
- Full modem and hardware flow control on RS-232
- 50bps to 230Kbps for EIA-232
- up to 230Kbps for EIA-422/485
- Customizable baud rate support for unique speed requirements
- SUN Break Safe
- Full bidirectional modem support
- 15Kv ESD protection on all signals
- EIA 232 full duplex
- EIA 422 full duplex
- EIA 485 4 wire, full duplex
- EIA 485 2 wire, half duplex, with echo
- EIA 485 2 wire, half duplex, without echo
Indicators
- Power/Ready
- Network Link activity
- Serial: Transmit and Receive data LEDs
Dimensions, Weight
- Dimension (L x W x H): 12.7 x 9.2 x 4.5 (cm)
- Weight – 0.5 kg
Power
- 9-30V DC on terminal blocks.
- Optional AC adapters available from Perle (barrel connector will need to be removed)
- p/n 04030674 (USA), 04030671 (UK), 04030672 (EU)
TruePort: Fixed TTY/COM port emulation software.
- 32 bit Microsoft Windows Server 2008, Windows Server 2003, 7, Vista , XP, 2000, NT
- 64 bit Microsoft Windows Server 2008, Windows Server 2003, 7, Vista , XP
- Linux (32 / 64 Bit)
- Solaris Intel and SPARC ( 32 and 64 bit )
- SCO UnixWare
- SCO OpenServer
- NCR
- HP UX including Itanium
- AIX
Environmental
- Operating temperature: -40°C to 74°C, -40°F
to 165°F
- Storage temperature: -40°C to 85°C, -40°F
to 185°F
- RoHS and WEEE Compliant
Approvals
- FCC Part 15A, CE, CAN/CSA 22.2, UL/CN 60950, EN 55022 Class A, EN 55024 Class A, CFR 47, ICES-003, IEC 60950-1
Warranty
- Limited lifetime warranty
Line Art
IOLAN SDS1 TD4 – 4 Digital I/O and 1 RS-232/422/485 Serial
Port
IOLAN SDS1 TD2R2 – 2 Digital I/O, 2 Relay outputs and 1
RS-232/422/485 Serial Port
IOLAN SDS1 TA4 – 4 Analog Inputs and 1 RS-232/422/485 Serial
Port
IOLAN SDS1 TT4 – 4 Thermocouple/RTD sensor inputs and 1
RS-232/422/485 Serial Port
IOLAN
SDS1 TA4R2 – 4 Analog inputs and 2 Relay Outputs and 1 RS-232/422/485
Serial Port
IOLAN SDS1 TA4D2 – 4 Analog inputs and 2 Digital I/O and
1 RS-232/422/485 Serial Port
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Universal Digital I/O, Analog input, RTD/Thermocouple temperature sensor input and EIA/RS-232/422/485
offers flexibility for a wide range of applications
- Digital I/O Extension provides a cable replacement
solution by transmitting digital input signals securely via
SSL to a remote output peer over an IP/Ethernet network
- Secure AES(256/192/128), 3DES,
Blowfish, CAST128, ARCFOUR or ARCTWO data encryption ciphers
across the LAN via SSH and SSL Models
without encryption are also available
- Advanced user authentication
via RADIUS, TACACS+, LDAP, Kerberos, NIS and RSA prevent
unauthorized access
- Attached
I/O devices can be Modbus UID addressable for operational
compatibility
- Plug & Play installation utility eliminates
configuration hassles for all IOLAN’s on your IP network
- Advanced event management using Port buffering,
Syslog, SNMP V3 and email event notification
- Operates in application
environments requiring extended ambient operating temperatures
of -40C to +74C (-40F to +165F).
- Central management capabilities via a Perle
Device Manager for Windows
- Access IOLAN SDS units using common web browsers
or command line interface over encrypted tunnels with HTTPS/SSL/TLS
or SSH
|
|
|
|
|
|
|