|
|
|
|
The RocketLinx MP1204-XT is a Gigabit 12-port industrial PoE switch with eight PoE Plus ports, which are IEEE 802.3af and IEEE 802.3at compliant and also provides four SFP slots. The MP1204-XT provides an extended operating temperature range, which is ideal for IP camera, access point, and critical PoE devices.
Includes: - RocketLinx MP1204-XT switch
- Quick Installation Guide
- Console cable (RJ45M to DB9M)
- Wall/panel and DIN rail mounting kits
- Power terminal connector
- Four RJ45 and four SFP dust plugs
Hardware
- Network InterfaceEight 10/100/1000 BASE TX PoE ports and four 100/1000BaseFX SFP slots
- Connector Types8 – RJ45 copper ports
4 – SFP slots
- Ingress ProtectionIP30
- EnclosureAluminum
- Installation MethodEN50022 DIN rail
- LED IndicatorsPower, Alarm, PoE, Link/Activity, Ring Role, and Ring Status
- Alarm RelayRelay output with current carrying capacity of 0.5A @ 24VDC. Configurable alarm profile to enable Alarm LED, alarm relay and SNMP traps
- Serial Console PortRJ45 to DB9 RS-232 (TxD, RxD, Signal Ground)
- Dimensions6.06”(H) x 5.04”(D) x 3.03”(W)
154mm(H) x 128mm(D) x 77mm(W)
- Switch TechnologyStore and forward, L2 wire-speed/non-blocking switching engine
- Product Weight3.15 lbs
1.43kg
Ethernet Specifications
- Number of Ports12
- RJ458: 10/100/1000BASE-T PoE Plus
Auto MDI/MDIX, Auto-negotiation (Speed/Duplex mode)
- SFP Slots4: SFP (pluggable) Ports 100/1000BASE
Auto-negotiation (Speed/Duplex Mode)
- SFPs (Optional)Supports 100FX SFP transceivers or 1000BASE-TX SFP transceivers
- Cable TypesCat 3, Cat 4, Cat 5, Cat 5e, Cat 6 (UTP or STP)
- Link DistancesRJ45: 100 meters
SFP (
Depends on the SFP model)
- Port Alarm RelayYes
- Jumbo Frame Size9K Bytes
- StandardsIEEE 802.3u: 10BASE-T Ethernet
IEEE 802.3u: 100BASE-TX Fast Ethernet
IEEE 802.3u: 100BASE-FX Fast Ethernet Fiber
IEEE 802.3z: Gigabit Ethernet Fiber
IEEE 802.3ab: 1000BASE-T Gigabit Ethernet Copper
IEEE 802.1AB: Link Layer Discovery Protocol (LLDP)
IEEE 802.1ad: Double Tagging (Q in Q)
IEEE 802.1D-2004: Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1p: Class of Service
IEEE 802.1Q: VLAN Tagging, GVRP, and Double Tag VLAN
IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1w: RSTP
IEEE 802.1X: Port Based Network Access Control
IEEE 802.3ad: Port Trunking with Link Aggregation Control Protocol (LACP)
IEEE 802.3x: Flow Control and Back-Pressure
- Internet ProtocolSupports IPv4 and IPv6
PoE Features
- PoE Modes802.3af
802.3at (2-event)
802.3at (LLDP-MED)
- Number of PoE Plus Injector Ports8
- PSE Type802.3at Type 2
Alternative A
- StandardsIEEE 802.3af PoE
IEEE 802.3at LLDP PoE Plus
- LLDP-MEDExtension of IEEE 802.1ab and is defined by ANSI/TIA-1057
- Maximum PoE Power/Port15.4W (IEE 802.3af)
30W (IEEE 802.3at)
- Total Power Budget (Max)240W
- Power ConsumptionWithout PD load (Max): 14W
PoE with PD load (Max): 265W with 240W PSE
IEEE 802.3af: 2.92A @ 48VDC [134W]
IEEE 802.3 at: 4.89A @ 53VDC [247W]
- PoE ControlEnable or disable PoE, set/port PoE mode, and schedule-based PoE functions
- Real-Time PoE StatusYes
- PoE Output Pin-Out (RJ45)Pins 1, 2 - V+
Pins 3, 6 - V-
- PoE SchedulingPoE ports are configurable as On/Off by hourly/daily/weekly basis
Management Features
- Configuration and Monitoring InterfacesOut-Band Management: console port with Command Line Interface (CLI) - Similar to Cisco CLI
In-Band Management: web interface (HTTP/HTTPS) or a telnet/ssh console with CLI
- System Upgrade/BackupWeb interface support for firmware upgrade and configuration backup/restore
- SNMPSNMP v1, v2c and v3
- SNMP MIBRFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB, RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
- System LogSupports server mode syslog
Security Features
- Port SecurityIP and MAC-based access control
IEEE 802.1X authentication network access control
- NASSupports system and port configuration
- User Privilege16 configurable user privileges.
- Authentication LevelsConsole, telnet, ssh, and http
- Access ManagementUp to 16 entries
- Server AuthenticationRADIUS and TACACS+
Network Redundancy
- Loop ProtectionProvides Layer 2 loop prevention through STP, RSTP, and MSTP. Loop protection increases the efficiency of STP, RSTP, and MSTP by preventing ports from moving into a forwarding state that would result in a loop in the network
- Multiple Spanning TreeIEEE 802.1s MSTP
- Rapid Spanning Tree ProtocolIEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP), Compatible with legacy STP and IEEE 802.1w
- Redundant Ring TechnologySupports single and multiple rings; ring coupling; dual- homing; chain
- Port Trunk with LACPStatic trunk or dynamic via LACP (Link Aggregation Control Protocol)
Network Performance
- Access Control ListPermit/ Deny Access Control Lists
- Back-PressureIEEE 802.3x Back-Pressure(Half Duplex)
- Class of Service (CoS)IEEE 802.1p - 8 Priority Queues/Port
- DHCPClient, Server, Relay, Snooping, Option 82
- Flow Control Pause FrameIEEE 802.3x (Full Duplex)
- Green EthernetEEE, ActiPHY, and PerfectReach
- IEEE 802.1adDouble-Tag for Private VLAN Access
- IGMPIGMP v1/v2/v3, proxy, snooping, and querying
- IP Source GuardAssign authorized IP addresses to specific port, 112 rules permitted per switch
- LLDPIEEE 802.1ab: Link Layer Discovery Protocol
- LLDP-MEDSupports Link Layer Discovery Protocol Media Endpoint Discovery
- Port-Based Network Access Control/EAPIEEE 802.1X: Port-Based network access control with EPoL (Extensible Authentication Protocol over LAN) to permit or deny interface access with remote RADIUS server authentication, TACACS+
- Port ConfigurationPort link speed, link mode, port status, enable/disable
- Port MirroringOnline traffic monitoring on multiple selected ports
- Port SecurityAssign authorized MAC addresses to specific port using the dynamic ARP inspection table, which can contain up to 256 entries
- Port Trunk/Link AggregationIEEE 802.3ad LACP – Port Aggregation and Static Port Trunk
Each trunk member supports up to 12 ports
Maximum of 6 trunk groups including Gigabit Ethernet ports
- Private VLANDirect client ports in isolated/community VLAN to port in primary VLAN
- sFlowSupported
- Time SynchronizationNTP protocol with Daylight Saving Function and Localize Time Sync Function.
- Traffic Prioritization (QoS)8 physical queues per port
Weighted Fair Queuing (WRR) or Strict Priority Scheme, which follows 802.1p QoS tag ID and IPv4 ToS/ Diffserv information to prioritize network traffic
Traffic shaper, which provides port-based shaping
RADIUS-assigned QoS class
- VLANIEEE 802.1Q VLAN with 4K (Max)
IEEE 802.1ad double tagging (Q in Q)
Maximum four multicast VLANS (MVR)
Port based
MAC-based VLAN
Protocol-based VLAN
IP Subnet-based VLAN
RADIUS assigned
- VoIPVoice VLAN, LLDP-MED
Electrical Specifications
- Device
- DC Input Voltage46-58 VDC
- Power ConsumptionMax. 14W without PD connected
265W with 240W PSE power delivered
- Number of Power Inputs2
- Power Connector Type6-Pin Screw Terminal Block
- Power Input RedundancyDual Redundant Inputs
- Reverse Polarity ProtectionYes
- Digital Output (Relay Output)1
- DC Input Voltage24VDC
- Current Consumption (30VDC)0.5A Maximum
- Multi-Event Relay FeatureLow and High Temperature Port Link
Environmental Specifications
- Air temperature
- System On-40° to 75 C
- System Off-40° to 85 C
- Operating Humidity (non-condensing)0% to 90%
- Mean Time Between Failures (MTBF)>25 Years
Environmental Specifications
- Packaged Shipping Weight4.1 lbs
1.86kg
- Package Dimensions9.5” x 7.5” x 5.2”
240mm x 190mm x 132mm
- UPC Code7-56727-32145-3
- ECCN5A991
- Schedule B Number8517.62.0050
Regulatory Approvals
- EmissionsEuropean Standard 61000-6-4:
Canadian EMC Requirements - ICES-003
CISPR 22
FCC Part 15 Subpart B
Class A limit
- ImmunityEuropean Standard 61000-6-2:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/ Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
IEC 1000-4-8/EN61000-4-8: Magnetic Field
IEC 1000-4-9/EN61000-4-9: Pulse Magnetic Field
IEC 1000-4-9/EN61000-4-11: Dips and Voltage Variations
- SafetyIEC 60950/EN60950:
CSA C22.2 No. 60950/UL60950
- OtherEuropean Standard: 2011/65/EU RoHS2
NEMA TS2 Compliant
- VibrationIEC60068-2-6
- ShockIEC 60068-2-27
- Free FallIEC 60068-2-32
- Regulatory Approvals
|
|
|
|
|
|
|