 |
 |
 |
|
The EDS-405A/408A-EIP are 5 and 8-port managed Ethernet switches with
EtherNet/IP enabled. With Ethernet/IP embedded, the EIP switches are
visible with custom faceplate in FactoryTalk® View industrial management
software, for greater operational and network visibility in factory
automation HMIs. The EDS-405A/408A-EIP also supports a variety of useful
management functions, such as IGMP snooping, IEEE 802.1Q VLAN, QoS,
port mirroring, SNMP, bandwidth management and warning by email or
relay.
| • Technology |
| Standards |
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging |
| Protocols |
IGMPv1/v2,
GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, TFTP, SNTP, SMTP, RARP,
RMON, HTTP, Telnet, Syslog, DHCP Option 66/67/82, BootP, LLDP,
EtherNet/IP, Modbus/TCP, IPv6, NTP Server/Client |
| MIB |
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| • Switch Properties |
| MAC Table Size |
2 K (EDS-405A-EIP), 8 K (EDS-408A-EIP) |
| Packet Buffer Size |
1 Mbit |
| • Interface |
| RJ45 Ports |
10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
| Console Port |
RS-232 (RJ45 connector) |
| DIP Switches |
Turbo Ring, Master, Coupler, Reserve |
| LED Indicators |
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M |
| Alarm Contact |
1 relay output with current carrying capacity of 1 A @ 24 VDC |
| • Power Requirements |
| Input Voltage |
24 VDC (12 to 45 VDC), redundant dual inputs |
| Input Current |
EDS-405A-EIP: 0.24 A @ 24 V
EDS-408A-EIP: 0.26 A @ 24 V |
| Overload Current Protection |
Present |
| Connection |
1 removable 6-contact terminal block |
| Reverse Polarity Protection |
Present |
| • Physical Characteristics |
| Housing |
Metal, IP30 protection |
| Dimensions |
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) |
| Packing Size |
19.2 x 16.8 x 9.3 cm |
| Weight |
650 g |
| Packing Weight |
EDS-405A-EIP series: 1140 g
EDS-408A-EIP series: 1220 g |
| Installation |
DIN-Rail mounting, wall mounting (with optional kit) |
| • Environmental Limits |
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| • Standards and Certifications |
| Safety |
UL 508, UL 60950-1*, CSA C22.2 No. 60950-1, EN 60950-1** |
| Hazardous Location |
UL/cUL Class I Division 2 Groups A/B/C/D*, ATEX Zone 2 Ex nC IIC* |
| EMI |
FCC Part 15 Subpart B Class A, EN 55022 Class A |
| EMS |
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8 |
| Marine |
DNV, GL |
| Traffic Control |
NEMA TS2 |
| Rail Traffic |
EN 50121-4** |
| Shock |
IEC 60068-2-27 |
| Freefall |
IEC 60068-2-32 |
| Vibration |
IEC 60068-2-6 |
|
* EDS-405A/408A-EIP ** EDS-408A-EIP only
|
| Note |
Please check Moxa’s website for the most up-to-date certification status. |
| • MTBF (mean time between failures) |
| Time |
EDS-405A-EIP Series: 392,000 hrs
EDS-408A-EIP Series: 363,000 hrs |
| Database |
Telcordia (Bellcore), GB |
| • Warranty |
| Warranty Period |
5 years |
Dimensions (unit=mm) 
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Command Line Interface (CLI) for quickly configuring major managed functions
- IPv6 Ready logo awarded (IPv6 Logo Committee certified)
- DHCP Option 82 for IP address assignment with different policies
- Support EtherNet/IP and Modbus/TCP protocols for device management and monitoring
- Ethernet/IP EDS (Electronic Data Sheet) file, custom AOE (Add-On Instructions) and FactoryTalk® View faceplate avalable
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy
- IGMP snooping and GMRP for filtering multicast traffic
- Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease networkplanning
- QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism
- RMON for efficient network monitoring and proactive capability
- SNMPv1/v2c/v3 for different levels of network management security
- Bandwidth management to prevent unpredictable network status
- Port mirroring for online debugging
|
|
|
|
|
|
|
