|
|
|
|
The IEX-402-SHDSL is an entry-level industrial managed Ethernet extender
designed with one 10/100BaseT(X) and one DSL port. The Ethernet
extender provides a point-to-point extension over twisted copper wires
based on the G.SHDSL.bis standard. The device supports a data rate of up
to 15.3 Mbps and a long transmission distance of up to 8 km.
The IEX-402-SHDSL series is designed for use in harsh operating
environments. The DIN-rail mount, wide operating temperature range (-40
to 75°C), and dual power input make it ideal for installation in
industrial applications.
To simplify configuration, the IEX-402-SHDSL uses CO/CPE auto
negotiation. By factory default, the device will automatically assign
CPE status to one of each pair of IEX devices. In addition, Link Fault
Pass-through (LFP) and network redundancy interoperability enhance the
reliability and accessibility of communication networks. Advanced
managed and monitored functionality through MXview, including a virtual
panel, improve the user experience for quick trouble shooting.
• Technology
|
Standards
|
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1p for Class of Service
ITU-T G.991.2 for Single-pair high-speed digital subscriber line
(G.SHDSL) transceivers
|
Protocols
|
SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet, Syslog, LLDP, Modbus/TCP
|
MIB
|
MIB-II
|
Flow Control
|
IEEE 802.3x flow control, back pressure flow control
|
• Switch Properties
|
MAC Table Size
|
1K
|
Packet Buffer Size
|
512K
|
• Interface
|
DSL Port
|
DSL Port: RJ-11(RJ-45 connector) or detachable 2-contact terminal block
|
RJ45 Ports
|
10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
|
Console Port
|
RS-232 (RJ45 connector)
|
DIP Switches
|
Reset button, CO/CPE, SNR/SPEED, ANNEX B/ANNEX A, STD/TURBO
|
LED Indicators
|
PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port)
|
• Power Requirements
|
Input Voltage
|
12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs
|
Input Current
|
0.36A @ 24V
|
Overload Current Protection
|
Present
|
Connection
|
2 removable 2-contact terminal block
|
Reverse Polarity Protection
|
Present
|
• Physical Characteristics
|
Housing
|
Metal, IP30 protection
|
Dimensions
|
35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in)
|
Weight
|
290 g
|
Installation
|
DIN-Rail mounting, wall mounting (with optional kit)
|
Altitude
|
Up to 2000 m
|
Note
|
Contact Moxa for products guaranteed to function at higher altitudes.
|
• Environmental Limits
|
Operating Temperature
|
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
|
Storage Temperature
|
-40 to 85°C (-40 to 185°F)
|
Ambient Relative Humidity
|
5 to 95% (non-condensing)
|
• Standards and Certifications
|
Safety
|
UL 508 (Pending)
|
EMI
|
FCC Part 15 Subpart B Class A, EN 55022 Class A
|
EMS
|
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8
|
Rail Traffic
|
EN 50121-4 (Pending)
|
Shock
|
IEC 60068-2-27
|
Freefall
|
IEC 60068-2-32
|
Vibration
|
IEC 60068-2-6
|
Note
|
Please check Moxa’s website for the most up-to-date certification status.
|
• MTBF (mean time between failures)
|
Time
|
1,310,000 hrs
|
Database
|
Telcordia (Bellcore), GB
|
• Warranty
|
Warranty Period
|
5 years
|
Details
|
See www.moxa.com/warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Automatic CO/CPE negotiation reduces configuration time
- Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8km transmission distance (performance varies by cable quality)
- Moxa proprietary Turbo Speed connections up to 15.3 Mbps
- Supports Link Fault Pass-Through(LFP) and Line-swap fast recovery
- Supports SNMP v1/v2c/v3 for different levels of network management
- Interoperable with Turbo Ring/Turbo Chain network redundancy
- Support Modbus/TCP protocol for device management and monitoring
- Compatible with EtherNet/IP and PROFINET protocols for transparent transmission
- Easy network management through web browser, Telnet/Serial console, Windows utility, MXview, and ABC-01
- IPv6 Ready
|
|
|
|
|
|
|