The JetCard 2205 is a flexible and high performance five-port
Ethernet switch card in Universal PCI format. The universal PCI bus of
JetCard 2205 supports both +3.3V and +5V slots. With the -25~70oC wide operating temperature range, JetCard 2205 is an ideal embedded networking solution for industrial applications.
Unmanaged Ethernet Switch: The JetCard 2205 uses
Marvell 88E6065 chip to provide 5 Ethernet ports and each port offers
IEEE 802.3 10 Base-T and 100 Base-Tx compliant Ethernet data
transmission with auto MDI/MDI-X and auto- negotiation.
Auto MDI/MDI-X: The JetCard
automatically determines whether or not it needs to interchange cable
sense between pairs so that an external crossover cable is not required.
If the JetCard interoperates with a device that cannot automatically
correct for crossover, the JetCard makes the necessary adjustment prior
to commencing Auto-Negotiation.
Flow control: The JetCard supports back-pressure
and pause frame-based flow control schemes to ensure zero packet loss
under temporary traffic congestion.
QoS (Quality of Service): QoS for networks is an
industry-wide set of standards and mechanisms for ensuring high-quality
performance for critical applications. JetCard provides the shared
memory-based QoS switch architecture. Packets are directed into one of
four traffic class queues based upon Port, IEEE 802.1p, IPv4’s TOS or
Diff-Serv, or IPv6’s Traffic Class.
Ethernet Statistics monitoring: The JetCard has a
set of thirty, 32-bit counters to provide a set of Ethernet statistics
for frames received on ingress and transmitted on egress. A register
interface allows the JetCard to capture, read, or clear the counter
values.
Customized Configurations: JetCard supports an
add-on EEPROM for programming its internal registers. The EEPROM data
will be read in once the JetCard is reset.
JetCard 2205 usage
Without driver JetCard 2205 works as an unmanaged switch, where
users will not see the IP address/Netmask configuration interface and
will not be able to communicate with devices, whereas with standard
driver built in Windows system the card will work as Network interface
card on your PC, allowing users to have an IP address/Netmask
configuration interface and communicate the devices with the IPC. For
more details on how to use JetCard, check our FAQ page - Click Here! |
|