|
|
|
|
The JetCard 2215 is a flexible and high performance
5-port Ethernet PoE switch card in Universal PCI
format. JetCard 2215 is ideal embedded networking
solution for transit surveillance applications.
12~24V DC Power Booster for 48V PoE: JetCard
2215 has an on board power module to adopt 12~24V DC input and then use
+3.3V and +5V for PCI card system and boost to 48V for 802.3af standard
PoE devices. So it needs extra 12~24V power input for system and PoE
function.
IEEE 802.3af Power over Ethernet: JetCard is IEEE802.3af standard compliant and
works as a PSE (power sourcing device) to deliver
15.4W per port.
Unmanaged Ethernet Switch: JetCard 2215 uses Marvell 88E6065 chip to
provide 5 Ethernet ports and each port offers IEEE 802.3 10 Base-T and 100 Base-Tx compliant Ethernet data transmission.
Auto MDI/MDI-X: JetCard automatically determine whether or
not it needs to interchange cable sense between
pairs so that an external crossover cable is not
required. If JetCard interoperate with a device
that cannot automatically correct for crossover, it makes the necessary adjustment prior to
commencing Auto-Negotiation.
Flow control: The JetCard supports back- pressure
and pause frame-based flow control schemes to ensure zero packet loss
under temporary traffic congestion.
JetCard 2215 usage
Without driver JetCard 2215 works as an unmanaged switch, where
users will not see the IP address/Netmask configuration interface and
will not be able to communicate with devices, whereas with standard
driver built in Windows system the card will work as Network interface
card on your PC, allowing users to have an IP address/Netmask
configuration interface and communicate the devices with the IPC. For
more details on how to use JetCard, check our FAQ page - Click Here! |
|
zxc Technology |
|
IEEE802.3 10 Base-T
IEEE802.3u 100 Base-Tx
IEEE802.3x flow control and Back Pressure
IEEE802.3af PoE |
|
|
Store and Forward architecture |
|
Interface |
|
|
|
10/100 Base-Tx RJ45 x5 (4 ports use RJ45 connectors
and support PoE function; 1 port use both RJ45 & JST connectors and
is reserved for internal connection)
10 Base-T/ 100 Base-Tx with auto MDI/MDI-X Auto-negotiation | |
|
assigned by Universal PCI plug and play | |
|
Windows 7/Vista/NT/2000/2003/XP
Linux 2.4.x/2.6.x
| |
PoE Technology |
|
detection, class ID 0~3 follow
IEEE802.3af standard |
|
PIN assignment (RJ45 connector): |
|
V+ (Pin 4,5), V- (Pin 7,8),
Tx (Pin 1,2), Rx (Pin 3,6) |
|
|
The control mode supports
IEEE802.3af standard. The maximum DC power delivery on each PoE is 15.4W@DC 48V input |
|
Hardware |
Communication Controller: | |
Realtek RTL 8139C+
Marvell 88E6065 |
|
|
|
|
10 Base-T: 4-pair UTP/STP Cat. 3,4,5 cable (100m)
100 Base-Tx: 4-pair UTP/STP Cat. 5 cable (100m) |
|
|
|
|
|
Performance |
|
14,880bps for Ethernet and 148,800bps for Fast Ethernet | |
|
|
|
|
|
|
Power Requirements |
|
DC 12~24V (ATX 4P connector) for system use and PoE function |
|
|
|
Environmental |
|
-25 ~ 70°C (-13 ~ 158°F), 5 ~ 95% RH | |
|
-40 ~ 80°C (-40 ~ 176°F), 5 ~ 95% RH | |
Regulatory Approvals |
|
CE, FCC Class A (Surge:0.5KV; ESD contact
4KV; Air 8KV) | |
|
|
Dimensions (Unit = mm)
JetCard 2215 4 PoE, 1 LAN, 12~24V Booster Switch Universal PCI Card
All items include:
- JetCard 2215
- DC Connector Cable, ATX R4 pin to L4 pin, 30cm
- Quick installation guide
- Documentation and software CD-ROM
|
|
|
|
|
|
|