|
|
|
|
JetI/O 6510 is a Block I/O module equipped with one Ethernet port
and 8 channels Analog Input connectors. JetI/O 6510 provides 16 bit
resolution and high accuracy for I/O data collecting. The analog input
range can support from 150mV to 10V and 20mA. The values are most
adopted in the industrial environment.
JetI/O 6510 provides Windows Utilities, SNMP and Web for
configuration. Industrial Modbus/TCP protocol and OPC Server driver for
integrating JetI/O with existed HMI/SCADA. Robust aluminum case is with
good heat dispersing and IP31 protection. With JetI/O users can easily
perform status monitoring and control the remote I/O devices.
System |
|
|
|
|
|
|
|
|
|
|
|
PWR: Power Input plugged and On (Green)
RDY: System startup ready (Red) |
|
Network Interface |
|
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX |
|
|
|
|
Built-in 1.5 KV magnetic isolation protection |
|
|
Upper (LAN Activity): Orange On & Blinking
Lower(10M/100M): 10M (Green Off) /100M(Green ON) |
|
Analog Input |
|
|
|
|
|
Voltage: ±10V,±5V, ±1V, ±500mV, ±150mV
Current: ±20mA with external 125Ohm resistor |
|
|
|
|
|
|
|
|
|
|
|
Feature |
|
IP, TCP, UDP, SNMP, HTTP, BOOTP, DHCP, Modbus/TCP, OPC Server |
|
|
Windows Utility, SNMP, Web, DHCP Client, BootP for firmware update |
|
|
one-to-one, one-to-many,
many-to-one, and many-to-many communication |
|
|
|
|
OPC Server for Modbus/TCP |
|
|
MIB-II: System, SNMP Trap and Private MIB |
|
|
|
|
High-/Low- Voltage/ Current alarms |
|
|
Conditions of the AI values,
Actions include the trap |
|
Power Requirement |
|
external unregulated +24V (18-32V)
|
|
|
|
Mechanical |
|
120 (H) x 55 (W) x 75 (D) mm
|
|
|
|
|
|
Environmental |
|
|
|
|
|
|
|
|
|
|
JetIO 6510 Appearance
Dimensions (Unit -mm)
JetI/O 6510: JetI/O 6510 Intelligent 8-CH Analog Input Ethernet I/O
Server
Includes:
Quick Installation Guide DIN Rail Mount kit
Documentation and Software
CD-ROM
|
|
|
|
|
|
|