Home > Moxa > Moxa Serial Device Servers > General Device Servers > NPort 5400 Series >

NPort 5410

NPORT5410
See any errors on this page?
Please let us know.
 
Alternative Views:


Moxa 4 port RS232 serial device server w/10/100, DB9M w/o power supply
Our Price: $475.35
Contact Us for Partner Pricing. (more info)



Availability:: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: NPORT5410

Description Technical Specs Drivers & Downloads
 

Network Readiness for up to Four Serial Devices

The NPort® 5410 device server can conveniently and transparently connect up to four serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.

Independent Operation Mode for each Serial Port

The NPort 5410 device server can be used to connect different devices for remote data polling, event handling, or data multicasting over a TCP/IP network. Each serial port on the NPort 5410 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.

User-friendly LCD Panel for Easy Installation

An LCD panel is built into the NPort® 5400’s top panel, with four buttons for inputting data, configuration, and selecting the operation mode. The LCD panel displays the server name, serial number, and IP address, and can be used to enter or modify parameters such as IP address, netmask, and gateway.

Redundant DC Power Inputs

NPort® 5400 device servers support redundant power sources and provide both a DC terminal block input and a DC power jack input. The two power inputs not only provide power redundancy, but also allow greater flexibility for use with different applications.


Adjustable Termination and pull High/Low Resistors

Termination resistors may be needed in some critical environments to prevent the reflection of serial signals. When using termination resistors, it is important to set the pull high/low resistors correctly to prevent the electrical signal from being corrupted. Since no set of resistor values is universally compatible with all environments, the NPort® 5400 has four sets of DIP switches on the bottom panel to set the termination and pull high/low resistor values.

NPORT5410
Features
  • 10/100M auto-sensing Ethernet
  • 4 serial ports, with support for RS-232, RS-422, and RS-485
  • Built-in 15 KV ESD surge protection for all serial signals
  • Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
  • Choice of configuration methods: Web console, Telnet console, and Windows utility
  • SNMP MIB-II for network management
  • 2 KV isolation protection for NPort 5430I/5450I/5450I-T
  • -40 to 75°C operating temperature range (T model)

Accessories
TB-F9 TB-F25 PWR-12150-USJP-SA-T DK35A
Our Price: $42.00
Our Price: $47.62
Our Price: $46.11
Our Price: $4.51
TB-F9 TB-F25 PWR-12150-USJP-SA-T DK-35A
PWR-12150-EU-SA-T
Our Price: $46.11

Product price is not filled in. This product cannot be purchased.

PWR-12150-EU-SA-T


Browse for more products in the same category as this item:

Moxa > Moxa Serial Device Servers > General Device Servers > NPort 5400 Series