Home > Digi > Digi Embedded Systems > Digi Net+Arm® Microcontrollers >

NS7520B-1-I55

Digi NS7520B-1-I55
See any errors on this page?
Please let us know.
 
Digi NS7520 NET+ARM Processor, 177 pin RoHS BGA Package, Industrial temp, 55 MHz Tray Quantity: 160   Minimum Order: 320 (*MOQ May Apply)
Our Price: $37.03
Contact Us for Partner Pricing. (more info)



Availability:: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: NS7520B-1-I55

Description Technical Specs Drivers & Downloads
 
The Digi NS7520 is a high-performance, highly integrated, 32-bit system-on-a chip ASIC designed for use in intelligent networked devices and Internet appliances. The NS7520 is based on the standard architecture in the NET+ARM™ family of devices.

The NS7520 can support most any networking scenario, and includes a 10/100 BaseT Ethernet MAC and two independent serial ports (each of which can run in UART or SPI mode).

The CPU is an ARM7TDMI 32-bit RISC processor core with a rich complement of support peripherals and memory controllers for various types of memory (including Flash, SDRAM, EEPROM, and others), programmable timers, a 13-channel DMA controller, an external bus expansion module, and 16 general-purpose input/output (GPIO) pins.

NET+ARM is the hardware foundation for the NET+Works™ family of integrated hardware and software solutions for device networking. These comprehensive platforms include drivers, popular operating systems, networking software, development tools, APIs, and complete development boards.
Features
CPU core:
  • ARM7TDMI 32-bit RISC processor
  • 32-bit internal bus
  • 32-bit ARM and 16-bit Thumb mode
  • 15 general purpose 32-bit registers
  • 32-bit program counter (PC) and status register
  • Five supervisor modes, one user mode
13-Channel DMA controller:
  • Two channels dedicated to Ethernet transmit and receive
  • Four channels dedicated to two serial modules’ transmit and receive
  • Four channels for external peripherals. Only two channels — either 3 and 5 or 4 and 6 — can be configured at one time
  • Three channels available for memory-to-memory transfers
  • Flexible buffer management
General purpose I/O pins:
  • 16 programmable GPIO interface pins
  • 4 pins programmable with level-sensitive interrupt

Integrated 10/100 Ethernet MAC:

  • 10/100 Mbps MII-based PHY interface
  • 10 Mbps ENDEC interface
  • TP-PMD and fiber-PMD device support
  • Full-duplex and half-duplex modes
  • Optional 4B/5B coding
  • Station, broadcast, and multicast address detection
  • 512-byte transmit FIFO, 2 Kbyte receive FIFO
  • Intelligent receive-side buffer selection

Programmable Timers:

  • Two independent timers (2μs–20.7 hours)
  • Watchdog timer (interrupt or reset on expiration)
  • Programmable bus monitor or timer

Operating Frequency:

  • 36, 46, or 55 MHz internal clock operation from 18.432 MHz crystal
  • fMAX = 36, 46, or 55 (grade–dependent)
  • System clock source by external quartz crystal or crystal oscillator, or clock signal
  • Programmable PLL, which allows a range of operating frequencies from 10 to fMAX
  • Maximum operating frequency from external clock or using PLL multiplication fMAX

Serial ports:

  • Two fully independent serial ports (UART, SPI)
  • Digital phase lock loop (DPLL) for receive clock extractions
  • 32-byte transmit/receive FIFOs
  • Internal programmable bit-rate generators
  • Bit rates 75–230400 in 16X mode
  • Bit rates 1200 bps–4 Mbps in 1X mode
  • Flexible baud rate generator, external clock for synchronous operation
  • Receive-side character and buffer gap timers
  • Four receive-side data match detectors
Power and Operating Voltages:
  • 500 mW maximum at 55 MHz (all outputs switching)
  • 418 mW maximum at 46 MHz (all outputs switching)
  • 291 mW maximum at 36 MHz (all outputs switching)
  • 3.3 V — I/O
  • 1.5 V — Core
Bus interface:
  • Five independent programmable chip selects with 256 Mb addressing per chip select
  • Chip select support for SRAM, FP/EDO DRAM, SDRAM, Flash, and EEPROM without external glue
  • 8-, 16-, and 32-bit peripheral support
  • External address decoding and cycle termination
  • Dynamic bus sizing
  • Internal DRAM/SDRAM controller with address multiplexer and programmable refresh frequency
  • Internal refresh controller (CAS before RAS)
  • Burst-mode support
  • 0–63 wait states per chip select
  • Address pins that configurem chip operating modes (see "NS7520 bootstrap initialization" on page 22 of DS)


Browse for more products in the same category as this item:

Digi > Digi Embedded Systems > Digi Net+Arm® Microcontrollers