 |
 |
 |
|
IDS-710-XT - Industrial Managed Ethernet Switch with 10 ports: 8 x 10/100/1000Base-T RJ-45 ports and 2 x SFP slots (supports 10/100/1000 on Copper & 1G/2.5G on Fiber). -40 to 75C operating temperature. PRO software feature set.
The IDS-710 is a 10 port Managed Ethernet Switch that can operate in industrial environments providing advanced performance and enabling real-time deterministic network operation. Eight 10/100/1000-Base-T Ethernet ports are available for networking Gigabit and Fast Ethernet devices. The two SFP slots support 10/100/1000 on Copper or 1G/2.5G on Fiber. This flexibility allows for easy adaptation to network growth and changes.
The SFP slots allow for flexible network configurations using SFP transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs. In addition, they make utilizing fiber is easy in environments where high levels of electromagnetic interference ( EMI ) is a common phenomenon, like industrial plants. This interference can cause data corruption over copper-based Ethernet links. However, data transmitted over fiber optic cable is completely immune to this type of noise ensuring optimal data transmission across the plant floor.
Perle Industrial-grade Ethernet Switches are designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, government, military, oil and gas, mining and outdoor applications. These rugged fan-less switches are hardened to provide superior reliability in -10 to 60°C. Or, choose the IDS-710-XT, where every component has been designed and tested to handle operating temperatures between -40 and 70°C.
The simple Plug and Play installation available in Perle's Fast Setup feature gets your Ethernet devices networked immediately. The familiar Command Line Interface ( CLI ), via in-band Telnet or the out-band serial console port, will be appreciated by CCNA ( Cisco Certified Network Associate ) and CCNP ( Cisco Certified Network Professional ) trained engineers.
The IDS-710 Managed Switches have Enterprise-grade features for environments where extensive security, QoS, and network integration functionality is required. They can be managed with an IPv6 address and supports a comprehensive set of management functions including MRP (IEC62439-2), PROFINET, Modbus TCP, management VLAN, Management Access Lists, Password Strength requirements, RMON, N:1 port mirroring, and local alert log.
All Perle Industrial Ethernet Switches only use high-end components from the leading chip manufacturers to ensure the highest level of durability and reliability. In addition, all units have a corrosion resistance aluminum case and dual redundant power input with reverse polarity and overload protection.
Perle has been designing industrial hardware since 1976. We used this expertise to design the toughest Ethernet switches on the market that will keep your system running for years to come.
Hardware Features & Technical Specifications: IDS-710 Industrial Managed DIN Rail Switch| Power |
|---|
| Dual Power Input | Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch.
12/24/48 VDC Nominal. (9.6 to 60 VDC)
Common negative | | Power & Alarm Connector | 8-Pin Removable Terminal Block.
Grounding screw on metal chassis | | Maximum Current Consumption @24 vDC | 0.35 amps | | Maximum Power Consumption @24 vDC | 8watts | | Overload Current Protection | Fused overload current protection | | Reverse polarity protection | The positive and negative inputs can be reversed providing safe and simple power connectivity. | | Access Ports |
|---|
| RJ45 | 8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V | | SFP | Two empty slots
Fixed and Multi speed SFP support: 10/100/1000 on SFP Copper & 1G/2.5G on SFP Fiber | | USB Serial Console port | MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections | | Alarm Relay |
|---|
- NO (Normally Open) dry contact.
- 1A @ 24V
| | Switch Properties |
|---|
| Microprocessor Frequency | ARM Cortex A8 600MHZ | | RAM & Flash | 4GB DDR3 & 4GB eMMC | | Standards | IEEE 802.3 for 10Base-T and 2500Base-T IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000BaseX and 2500BaseX IEEE 802.3u for 100Base-TX and 100Base-FX Energy Efficient Ethernet (EEE) as per 802.3az. IEEE 802.3x for Flow Control IEEE 1588 – 2008 (in software only) 802.1x | | Processing Type | Store and Forward | | MAC Address Table Size | 8K | | VLAN ID range | 1 to 4000 | | IGMP groups | 1024 | | Packet Buffer Memory | 1 Mbit | | Jumbo Frame Size | 10 KB | | Indicators |
|---|
| System | Indicates whether the switch O/S is operating normally | | RJ45 Ethernet | These integrated colored LEDs indicate link, activity and speed for each port. | | Fiber Link | Fiber link LED indicates Link and Data Activity | | Alarm | The alarm LED (Red) will be turned on under alarm conditions | | Reset | Once pushed all 4 LEDs are solid Red for 3 seconds | | Environmental Specifications |
|---|
| MTBF | 252,377 Hours
Calculation model based on MIL-HDBK-217-FN2 @ 30 °C | | Operating Temperature Ranges | IDS-710: -10° C to 60° C (14° F to 140° F).
IDS-710-XT: -40° C to 70° C (-40 F to 158° F) | | Storage Temperature Range | -40 C to 85 C (-40 F to 185 F) | | Operating Humidity Range | 5% to 90% non-condensing | | Storage Humidity Range | 5% to 95% non-condensing | | Maximum Heat Output | 27 Btu/hr | | Operating Altitude | Up to 3,048 meters (10,000 feet) | | Chassis | Metal with an IP20 ingress protection rating | | Din Rail Mountable | DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Removable to accommodate optional Panel/Wall mount kit | | Product Weight and Dimensions |
|---|
| Weight | 0.35 kg / 0.77 lb | | Dimensions (W x H x D) | 45 x 93 x 109 mm / 1.77 x 3.66 x 4.29 in | | Packaging |
|---|
| Shipping Weight | 0.50 kg / 1.1 lb | | Shipping Dimensions | 25 x 17 x 7 cm / 9.84 x 6.7 x 2.75 in | | Standards and Certifications |
|---|
| Safety | CE Mark UL/IEC 61010-1 and UL/IEC 61010-2 UL/EN/IEC 62368-1
CAN/CSA C22.2 No. 62368-1 | | Emissions | FCC 47 Part 15 Class A, EN55032 (CISPR32) Class A ICES-003 EN61000-6-4 (Emissions for industrial environments) CISPR 32:2015/EN 55032:2015 (Class A) CISPR 24:2010/EN 55024:2010 EN61000-3-2 | | EMC and Immunity | CISPR 24 / EN55024 CISPR 32 / EN55032 IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 4kv, Air discharge +/- 8kv IEC/EN 61000-4-3 (RS) : 80mhz to 16hz ; 20v/m, 1.5hkz to 2.0ghz ; 10 v/m, 2.0ghz to 2.7 ghz ; 5 v/m IEC/EN 61000-4-4 (EFT) : DC power line +/- 2kv, data line +/- 1kv IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kv, Line/Earth +/- 2kv, data line /earth +/- 2kv IEC/EN 61000-4-6 (CS) :150mhz-80mhz 10vrms IEC/EN 61000-4-8 (Magnetic Field) :30 A/M EN 61000-4-11 IEC/EN 61000-6-2 (General Immunity in Industrial Environments) | | Environmental | Reach, RoHS and WEEE Compliant | Other | ECCN: 5A992 | | HTSUS Number: 8517.62.0020 | | 5 year Warranty | | Contents Shipped | - Industrial Ethernet Switch with DIN Rail attachment
- Terminal block
- Installation guide
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 8 x 10/100/1000Mbps RJ45 Ethernet Ports
- 2 x SFP Slots supporting 1G/2.5G Fiber or 10/100/1000Base-T
- PROFINET and Modbus TCP protocols supported for monitoring and device management
- Ring Protocol MRP (IEC 62439-2) has <10ms recovery time
- STP/RSTP/MSTP for network redundancy
- Advanced Security and IT management features: TACACS+, RADIUS, 802.1x, SSH, SNMPv3, and HTTPS
- IEEE 1588 V1 and V2 PTP for microsecond accuracy
- Advanced protocols to optimize the performance and intelligence of the network: IGMP Snooping, LLDP-MED, GVRP, Voice VLANs, MSTP, GMRP, and IPv6 MLD Snooping
|
|
|
|
|
|
|