Home > Perle > Perle Industrial Media Converters > Perle Stand-Alone Media Converters > Perle Managed Media Converters > Perle Managed Ethernet to Fiber > Perle Managed 10G SFP/XFP Media Converter >

05071124
05071124
See any errors on this page?
Please let us know.
  
Perle SMI-10G-XTSH  - 10 Gigabit Ethernet IP-Managed Stand-Alone Media Converter with one XFP slot (empty) and one SFP+ slot ( empty ). Supports Power Level 4 XFPs. AC adapter included
List Price: $2,979.00
Our Price: $2,323.20
Contact Us for Partner Pricing. (more info)



Availability:: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: 05071124

Description Technical Specs Drivers & Downloads
 

Perle SMI-10G Managed Media Converters transparently connect 10 Gigabit Ethernet links over multimode or single mode fiber in environments where network security is critical. Each 10GbE Media Converter comes with two pluggable transceiver ports that support fiber to fiber, copper to fiber or copper to copper media conversion.

SMI-10G Managed Media Converters support all authentication, authorization and accounting (AAA) security services used in corporate networks, including TACACS+, RADIUS, LDAP, Kerberos, NIS and RSA. To further protect ID’s and passwords from someone ‘snooping’ on the network, Perle Managed Media Converters provide secure management sessions by supporting SSH, SNMPv3, Telnet and HTTPS. These types of features are used when managing your corporate firewalls, switches and routers. This is why Perle makes them available in the SMI-10G Managed Media Converter. 10G Media Converters are also available for unmanaged applications.

Fiber to Fiber and Copper to Fiber conversion is achieved by inserting XFP or SFP+ fiber transceivers that support multimode and single-mode fiber, including CWDM/DWDM wavelengths. Copper to copper is achieved by inserting SFP+ Direct Attach Cable (DAC), also known as twinax, or XFP 10Gbase-CX4 transceivers.

The empty transceiver ports on the SMI-10G Media Converters allow for flexible network configurations to meet any requirement using a variety of 10G transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFP+ and XFPs. You can use these products to convert:

  • SFP+ to SFP+
  • XFP to XFP
  • XFP to SFP+
  • SFP to SFP ( 1000Base-x to 1000Base-x )
  • SFP+ to CX4

Perle 10 Gigabit Ethernet to Fiber Converters provide an economical path to extend the distance of an existing 10GbE link. Network Administrators can “see-everything” with Perle’s advanced features such as Smart Link Pass-Through, Fiber Fault Alert, a built-in Link Test capability and Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle SMI-10G Media Converters the smart choice for IT professionals.

 

V
Features
  • Uses a variety of 10G transceivers supplied by Perle, Cisco or other MSA compliant SFP+ and XFPs
  • Advanced features –Smart Link Pass-Through, Fiber Fault Alert, Built-in Link Test Generator and Loopback
  • Support for Power Level 1,2,3 as well as high-power Level 4 XFPs
  • Optical signal regeneration: 3R (re-amplify, reshape, and retime)
  • Manage via SNMP, CLI - Telnet/SSH, Internet browser, or
    PerleVIEW Centralized Management Package

    •  

    SMI-10G Managed Media Converter Features

    Smart Link Pass-ThroughWhen the Smart Link Pass-Through switch is enabled (default), each port will reflect the state of its port peer. In this mode, if a link loss is detected on one port, the transmit signal on the other port is disabled “passing through” the state of the failed link. This enables managed switches and other devices to report link failures to their network NMS.

    When the switch is in the down position, Smart Link Pass-Through is disabled. If a link loss is detected on one port, the transmit signal remains enabled on the other port.
    Fiber Fault AlertWith Fiber Fault Alert the state of the 10 Gigabit Ethernet receiver is passed to the transmitter. This provides fault notification to the partner device attached to the 10G Ethernet interface of the media converter.
    3R – Optical Signal RegenerationOptical signal regeneration: 3R ( Re-amplify, Reshape, and Retime the signal ) ensures that there is a quality link at 10 Gigabit speeds.
    Built-in Link TestWhen enabled, the built-in packet generator transmits Ethernet test frames to its 10 Gigabit Ethernet peer. The remote media converter will auto-detect the test frames and loopback the test frames. Any frames received in error, will cause the Power, LK1 and LK2 LEDs to illuminate in a specific combination to identify the error. During the test different bit test patterns will be utilized every 5 seconds ensuring a thorough link test.
    Test Mode Auto-detectWhen enabled through the management interface, the remote media converter will enter test mode automatically when requested by its central site peer. This virtually eliminates unnecessary truck rolls to a remote site when diagnosing a link failure.
    EDC Mode ControlElectronic Dispersion Compensation (EDC) is an algorithmic method used to compensate for optical dispersion that occurs on high speed 10 Gigabit links. EDC mode settings are automatically configured by the media converter based on the information retrieved from the SFP+ or XFP module. This will enable proper operation for extended multimode 10GBase-LRM as well as active or passive copper cabling.
    Module Temperature ProtectionProtects your DOM/DMI capable SFP+ or XFP module by monitoring its internal temperature and will automatically shut down the XFP or SFP if the module is operating above its maximum temperature threshold.
    High Power Level 4 XFPsHigh powered Level 4 XFPs are supported in XTSH and XTXH models.
    Gigabit SFP supportThe 10 Gigabit media converter model with dual SFP+ slots can also support Gigabit (1000Base-X) SFPs. This allows users to use Gigabit SFPs today and migrate to 10G SFP+ in the future. Both slots must be populated with Gigabit SFPs.
    Jumbo PacketsTransparent to jumbo packets.
    VLANTransparent to VLAN tagged packets.
    Remote LoopbackCapable of performing a loopback on each 10 Gigabit interface. In this mode, all frames received on the port in loopback mode will be transmitted back. This provides users with the capability of utilizing their own in-house test generators for testing the link.
    Configuration Mode selectionSelect whether to use the on-board DIP switches or the management software for mode selection.
    Converter Information
    • Media converter model and serial
    • User configurable name
    • User configurable fiber port name
    • Hardware revision number
    • Firmware version number
    Module DIP switch settingsView hardware DIP switch settings.
    Port ControlEnable or disable individual fiber ports on the module.
    Fiber Port Status
    • Port Enabled (Yes/No)
    • Connector
    • Link Status (Up/Down)
    • Fiber Fault Alert (OK, Failed)
    • Fiber Loopback mode (On/Off)
    Control
    • Reset
    • Reset to factory default
    • Ability to specific read/write phy registers
    • Update firmware
    • Fiber Loopback mode (Yes/No)
    • Upload/download configuration
    Manage Tune-able DWDM XFP modulesSelect transceiver ITU 50GHz center wavelengths and channel numbering on tune-able XFP transceivers.

     

    SMI-10G Advanced Management Features

    Enterprise and carrier-grade security is available through the support of strong authentication systems such as TACACS+, RADIUS and LDAP. Secure in-band access is assured via SNMPv3, SSH CLI and secure HTTPS Internet browser.

    SNMP
    • Full read/write capabilities via central SNMP servers and PerleVIEW
    • Send SNMP traps ( up to 4 servers )
    • SNMPv3, V2C and V1
    • SNMPv3 – encryption and authentication for both management and trap support
    • RFC1213 MIB II
    • Proprietary MIB provided
    Telnet / SSH CLI accessIn-band command line access via Telnet or SSH application.
    Internet Browser access
    Console port CLI accessOut-of-band command line access via Cisco compatible RJ45 serial console port using common “rolled” CAT5 cable.
    Console port can be enabled ( default ) or disabled.
    Concurrent management sessionsRun multiple management sessions simultaneously for multiple users.
    Inactivity timeoutProtect secure management sessions by setting an inactivity timeout value.
    Alert event reportingAlert level events are stored in the local event log and sent as:

    • SNMP traps to up to 4 servers
    • SYSLOG messages to a SYSLOG server
    • Email to user defined email address
    Advanced IP feature set
    • IPV4 and IPV6 address support
    • DHCP
    • DNS
    • Dynamic DNS
    • NTP
    • TFTP
    • Telnet
    • SSH V2 and V1
    • HTTP
    • HTTPS
    Advanced Management User Authorization and Accounting with primary and secondary server support
    • TACACS+
    • RADIUS
    • LDAP
    • Active Directory via LDAP
    • RSA Secure ID-agent or via RADIUS authentication
    • Kerberos
    • NIS
    Encryption
    • AES (256/192/128), 3DES, DES, Blowfish, CAST128, ARCFOUR(RC4), ARCTWO(RC2)
    • Hashing Algorithms: MD5, SHA-1, RIPEMD160, SHA1-96, and MD5-96
    • Key exchange: RSA, EDH-RSA, EDH-DSS, ADH
    • X.509 Certificate verification: RSA, DSA
    Access Control ListAn access control list can be created which can filter out only those workstations that are authorized to access the management resources. Filter on IP and/or Ethernet MAC addresses.
    Network Services FilterEnable only those network services on the management module that are allowed on your network ( Telnet, SSH, HTTP, HTTPS, SNMP ).
    Firmware downloadUpdate the latest level firmware for management and media converter modules via TFTP or PerleVIEW.


    Browse for more products in the same category as this item:

    Perle > Perle Industrial Media Converters > Perle Stand-Alone Media Converters > Perle Managed Media Converters > Perle Managed Ethernet to Fiber > Perle Managed 10G SFP/XFP Media Converter