|
Power
|
Dual SFP
|
Dual XFP
|
XFP to SFP
|
|
Input Supply Voltage
|
12 vDC Nominal
|
|
Maximum Current Amps @ 12v DC
|
0.8
|
XTX: 1.25
XTXH: 1.6
|
XTS: 1.0
XTSH: 1.6
|
|
Maximum Power * Requirements (watts)
|
SMI-10G: 9.7
SMI-10GR: 19.5*
|
XTX: 15.0 *
XTXH: 19.3 *
|
XTS: 12.0 *
XTSH: 19.3 *
|
|
Power Connector
|
5.5mm x 9.5mm x 2.1mm barrel socket
|
|
Power Adapter
|
|
Universal AC/DC Adapter
|
100-240v AC, regulated AC/12v DC adapter included
STS and XTS : 12 watt adapter
XTX, XTXH and XTSH : 24 watt adapter
|
|
Indicators
|
|
Power / TST
|
- On: Power indication and in normal operation
- Blinking slowly: the unit is in loopback or test mode (either port)
- Blinking quickly: the unit has a hardware error (Err LED will also be on)
|
|
LK1, LK2
|
- On: Fiber link present
- Blinking quickly: Fiber link present and receiving data.(including test data)
- Blinking slowly: Fiber link disabled because the other fiber link went down.
- Blinking 1 sec on 3 sec off – invalid SFP+ or XFP inserted
- Blinking twice then 3 sec off – module shut down due to high temperature.
- LK1, LK2 alternating on and off – 1 sec on 1 sec off incompatible Speeds ( Err LED will also be on)
- Off: No fiber link present or no module inserted
|
|
ERR LED
|
When in test mode – this indicates test mode errors – will clear when the link has recovered
- If Power LED is blinking, this indicates a hardware error
- If LNK LEDS blink, this indicates that there is a module compatibility error
|
|
Switches - accessible through a side opening in the chassis
|
|
Smart Link Pass-Through
|
When the Smart Link Pass-Through switch is enabled ( default ), each port will reflect the state of its port peer. In this mode, if a link loss is detected on one port, the transmit signal on the other port is disabled “passing through” the state of the failed link. This enables managed switches and other devices to report link failures to their network NMS.
When the switch is in the down position, Smart Link Pass-Through is disabled. If a link loss is detected on one port, the transmit signal remains enabled on the other port.
|
|
Fiber Fault Alert
|
Enabled (Default - Up)
With Fiber Fault Alert the state of the 10 Gigabit ethernet receiver is passed to the transmitter. This provides fault notification to the partner device attached to the 10G ethernet interface of the media converter
Disabled (Down)
|
|
EDC Mode
|
Electronic Dispersion Compensation is an algorithmic method used to compensate for optical dispersion that occurs on high speed 10 Gigabit links. EDC mode settings are automatically configured by the media converter based on the information retrieved from the SFP+ or XFP module. This will enable proper operation for extended multimode 10GBase-LRM as well as active or passive copper cabling.
In the default UP switch position the media converter will automatically set the 10G transceiver to match the EDC type declared by the SFP+ / XFP module to either to “linear” or “limiting”.
In the event that there is a mismatch, setting the switch to the Down position on the media converter will flip the setting to that declared by the module.
|
|
Loopback
|
Capable of performing a loopback on each 10 Gigabit interface. In this mode, all frames received on the port in loopback mode will be transmitted back. This provides users with the capability of utilizing their own in-house test generators for testing the link.
|
|
Connectors
|
Dual SFP
|
Dual XFP
|
XFP to SFP
|
|
Pluggable 10G Fiber Transceiver slots ( Hot insertion and removable)
|
Two 10 Gigabit SFP+ Slots
|
Two 10 Gigabit XFP Slots
- Power level 1,2,3
- Power Level 4 (XTSH model)
|
One 10 Gigabit SFP+
One 10 Gigabit XFP
- Power level 1,2,3
- Power Level 4 (XTSH model)
|
|
Voltages supplied to XFP slots
|
-
|
1.8V, 3.3V, 5V and -5.2V
|
1.8V, 3.3V, 5V and -5.2V
|
|
Supported 10 Gigabit Fiber pluggable transceivers
|
IEEE 802.3ae compliant:
- 10GBase-SR
- 10GBase-LRM
- 10GBase-LR
- 10GBase-ER
- 10GBase-ZR
CWDM/DWDM
|
IEEE 802.3ae compliant:
- 10GBase-SR
- 10GBase-LRM
- 10GBase-LR
- 10GBase-ER
- 10GBase-ZR
CWDM/DWDM
|
IEEE 802.3ae compliant:
- 10GBase-SR
- 10GBase-LRM
- 10GBase-LR
- 10GBase-ER
- 10GBase-ZR
CWDM/DWDM
|
|
Supported 10 Gigabit Copper pluggable transceivers
|
SFP+ Direct Attach Cable (DAC). Also known as:
- Twinax
- 10GBase-CU
- 10GSFP+Cu
- 10GBase-CX1
- 10GBase-CR1
Note: Passive and Active cable types supported
|
IEEE 802.3ak compliant:
|
SFP+ Direct Attach Cable (DAC). Also known as:
- Twinax
- 10GBase-CU
- 10GSFP+Cu
- 10GBase-CX1
- 10GBase-CR1
Note: Passive and Active cable types supported
IEEE 802.3ak compliant:
|
|
Supported 2.5 Gigabit Copper pluggable transceivers
|
S-10GR Model:
SFP+ Direct Attach Cable (DAC).
Note: Passive and Active cable types supported
|
N/A
|
N/A
|
|
Supported Gigabit Fiber SFPs
|
1000Base-SX
1000Base-LX/LH
1000Base-EX
1000Base-ZX
1000Base-BX
CWDM/DWDM
Note: In this mode both SFP modules must operate 1000Base-X
|
N/A
|
N/A
|
|
Environmental Specifications
|
Dual SFP
|
Dual XFP
|
XFP to SFP
|
|
Operating Temperature
|
0° C to 50° C (32° F to 122° F)
|
|
Storage Temperature
|
minimum range of -25° C to 70° C (-13° F to 158° F)
|
|
Operating Humidity
|
5% to 90% non-condensing
|
|
Storage Humidity
|
5% to 95% non-condensing
|
|
Operating Altitude
|
Up to 3,048 meters (10,000 feet)
|
Heat Output
( BTU/HR )
|
SMI-10G: 13.1
SMI-10GR: 67
|
XTX: 51.2 *
XTXH: 65.9 *
|
XTS: 40.9 *
XTSH: 65.9 *
|
|
MTBF (Hours)**
|
Without power adaptor:
SMI-10G: 194,615
SMI-10GR: 132,947
With power adaptor:
SMI-10G: 138,338
SMI-10GR: 92,122
|
Without power adaptor: 184,350
With power adaptor: 139,590
|
Without power adaptor: 184,350
With power adaptor:
133,071
|
|
Chassis
|
Metal with an IP20 ingress protection rating
|
|
Mounting
|
|
Din Rail Kit
|
Optional
|
|
Wall / Rack Mount Kit
|
Optional
|
|
Product Weight and Dimensions
|
|
Weight
|
0.93 Kg, 2.1 lbs
|
|
Dimensions
|
175 x 145 x 46mm, 6.9 x 5.7 x 1.8 inches
|
|
Packaging
|
|
Shipping Weight
|
STS and XTS : 1.2 Kg, 2.6 lbs
XTX, XTXH and XTSH : 1.5 Kg, 3.3 lbs
|
|
Shipping Dimensions
|
300 x 200 x 70 mm, 11.8 x 7.9 x 2.8 inches
|
|
Regulatory Approvals
|
|
Emissions
|
FCC Part 15 Class A, EN55022 Class A
|
CISPR 22 Class A
CISPR 32:2015/EN 55032:2015 (Class A)
CISPR 24:2010/EN 55024:2010
|
|
EN61000-3-2
|
|
Immunity
|
EN55024
|
|
Electrical Safety
|
UL 60950-1
|
IEC 60950-1(ed 2); am1, am2
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
|
|
CE
|
|
Environmental
|
Reach, RoHS and WEEE Compliant
|
|
Other
|
ECCN: 5A992
|
|
HTSUS Number: 8517.62.0050
|
|
CCATS: G134373
|
|
Perle Limited Lifetime Warranty
|
