About This Item
Overview
Details
Installed in a high density Perle Media Converter Chassis, Perle's feature rich Fast Ethernet Media Converter Modules family transparently connects UTP copper to fiber. Our fast ethernet media converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices.
Network Administrators can rest assured with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Pause which make the end to end link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle'sfast ethernet media converter modules the smart choice for IT professionals.
Documentation
Features
- 100Base-TX to 100Base-FX Fiber Media Converters
- Extend network distances up to 120km
- SC, LC and ST Media Converters
- Advanced Features: Link Pass-Through, Far-End Fault, Auto-MDIX
- High density applications with Perle Media Converter Chassis
Fast Ethernet Converter Features: 100Base-TX to 100Base-FX
| Auto-Negotiation (802.3u) | The media converter supports auto negotiation on the fast ethernet 100Base-TX interface. |
| Auto-MDIX | Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the 100Base-TX interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. With Auto-MDIX enabled, either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable. |
| Link Pass-Through | With Link Pass-Through the state of
the 100Base-TX receiver is passed to the 100Base-FX transmitter to make
the media converter appear transparent to the end devices that are
connected. In addition if Far-End Fault is enabled the media converter
can turn off the 100Base-TX transmitter when a FAR-End Fault is
received. Using Link Pass-Through with Far-End Fault minimizes data loss when a fault occurs. Should a fault occur, the end devices have the indication of a failure available to them making trouble shooting easier. |
| Far-End Fault (FEF) | The media converter implements the
802.3 standard for Far-End Fault for the indication and detection of
remote fault conditions on the 100Base-FX fiber connection. With Far-End
Fault enabled the media converter transmits the Far-End Fault
Indication over the 100Base-FX fiber connection whenever a receive
failure is detected on the 100Base-FX fiber connection. The media
converter continuously monitors the100Base-FX fiber connection for a
valid signal. The action the media converter takes on receiving a Far-End Fault Indication is dependent on the Link Pass Through switch setting. |
| Pause (IEEE 802.3xy) | Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The fast ethernet media converter supports pause negotiation on the 100Base-TX copper connection. |
| VLAN | The media converter is transparent to VLAN tagged packets. |