About This Item
Overview
Details
Perle's feature rich S-1000MM Gigabit Fiber to Fiber Media Converters enable transparent fiber extension of 1000Base-SX multimode fiber to 1000Base-SX multimode or 1000Base-LX/EX/ZX/BX single mode fiber.
Perle's advanced features make the end to end fiber link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. In addition, a lifetime warranty and free worldwide technical support make Perle's S-1000MM Gigabit Fiber to Fiber Media Converters the smart choice for IT professionals.
Whether you need to extend multimode to multimode or multimode to single mode, Perle has an extensive range of S-1000MM Gigabit Fiber to Fiber Media Converters to meet your fiber conversion requirement.
Documentation
Installation Guide
| Power | |
|---|---|
| Input Supply Voltage | 6 - 30 vDC, unregulated ( 12 vDC Nominal ) |
| Current | 0.21 amps |
| Power Consumption | 2.5 watts |
| Power Connector | 5.5mm x 9.5mm x 2.1mm barrel socket |
| Power Adapter | |
| Universal AC/DC Adapter | 100-240v AC, regulated DC adapter included |
| Indicators | |
| Power / TST | This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode. |
| Fiber link 1 / Receive activity (LK1) | This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received. |
| Fiber link 2 on / Receive activity (LK2) | This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received. |
| Switches - accessible through a side opening in the chassis | |
| Auto-Negotiation | Auto (default up) - Fiber Negotiation is performed
for both fiber ports. Full and half duplex will be advertised. Pause
will advertise support for Symmetrical and Asymmetrical Pause. Pause
frame will not be acted upon or generated but will be passed through. Off - Negotiation on both fiber ports will be disabled. Settings of Link mode and Fiber fault alert will be determined by those switch settings. Pause frames will not be acted upon or generated but will continue to be passed through. |
| Link Mode | Smart Link Pass-Through: - (default up) - In
this mode, the link state on one connection is directly reflected
through the media converter to the other connection. If link is lost on
one of the connections, then the other link will be brought down by the
media converter. Standard: - In this mode the links on both fiber ports can be brought up and down independently of each other. A loss of link on either link can take place without affecting the other connection |
| Fiber Fault Alert | Enabled - (default up) - If the media converter
detects a loss of fiber signal on a fiber receiver, it will immediately
disable its fiber transmitter signal. This, in effect, notifies the
remote fiber link partner that an error condition exists on the fiber
connection. The setting of this switch applies to both fiber ports Disabled: The media converter will not monitor for fiber fault or generate them. |
| Remote Loopback #1 | The media converter can perform a loopback on the link #1 fiber interface. Disabled (Default - Up) Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. Link #2's fiber transmitter is taken off the interface |
| Remote Loopback #2 | The media converter can perform a loopback on the link #2 fiber interface. Disabled (Default - Up) Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. Link #1's fiber transmitter is taken off the interface |
| Fiber Connectors | |
| 1000Base-X | Available in SC, ST and LC connector models |
| Packet Transmission Characteristics | |
| Bit Error Rate (BER) | <10 -12 |
| Environmental Specifications | |
| Operating Temperature | 0∞ C to 50∞ C (32∞ F to 122∞ F) |
| Storage Temperature | minimum range of -25∞ C to 70∞ C (-13∞ F to 158∞ F) |
| Operating Humidity | 5% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| Operating Altitude | Up to 3,048 meters (10,000 feet) |
| Heat Output ( BTU/HR ) | 8.53 |
| MTBF (Hours) | Without power adaptor: 432,138 With power adaptor: 274,804 |
| Mounting | |
| Din Rail Kit | Optional |
| Wall / Rack Mount Kit | Optional |
| Product Weight and Dimensions | |
| Weight | 0.3 kg, 0.66 lbs |
| Dimensions | 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches |
| Packaging | |
| Shipping Weight | 0.55 kg, 1.2 lbs |
| Shipping Dimentions | 170 x 280 x 70 mm, 6.7 x 10.2 x 2.8 inches |
| Regulatory Approvals | |
| Emissions | FCC Part 15 Class A, EN55022 Class A |
| CISPR 22 Class A | |
| EN61000-3-2 | |
| Immunity | EN55024 |
| Electrical Safety | UL 60950-1 |
| EN60950 | |
| CE | |
| Laser Safety | EN 60825-1:2007 |
| Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11. | |
| Environmental | RoHS - 2002/95/EC Directive |
| WEEE - 2002/96/EC Directive | |
| Reach compliant | |
| Other | ECCN: 5A991A |
| HTSUS Number: 8517.62.0050 | |
| Perle Lifetime warranty | |
Features
- 1000Base-SX to 1000Base-X Fiber to Fiber Media Converters
- Multimode to multimode or multimode to single mode
- Extend multimode fiber to 160km and beyond ( through cascading )
- Choice in SC, LC and ST fiber connector models
- Signal regeneration prevents signal degradation
- Advanced Features: Smart Link Pass-Through, Fiber Fault Alert, loopback for each fiber connection
S-1000MM Fiber to Fiber Features: 1000Base-SX to 1000Base-X
| Auto-Negotiation (802.3ab) | The 1000Base-X fiber interfaces negotiate according to 802.3 clause 37. |
| Smart Link Pass-Through | When the Link Mode switch is placed into Smart Link Pass-Through mode, the 1000BASE-X link on one port will reflect the state of the other 1000Base-X media converter port. This feature can be used whether fiber auto-negotiation is enabled or disabled. |
| Fiber Fault Alert | With Fiber Fault Alert the state of the 1000Base-X receiver is passed to the 1000Base-X transmitter. This provides fault notification to the partner device attached to the 1000Base-X interface of the media converter. If the 1000Base-X transmitter is off as a result of this fault it will be turned on periodically to allow the condition to clear should the partner device on the 1000Base-X be using a similar technique. This eliminates the possibility of lockouts that occur with some media converters. Applies only when fiber auto-negotiation is disabled. |
| Signal Regeneration | Signal regeneration maintains signal integrity and allows for maximum fiber to fiber connections without degradation. |
| Cascading | Media converters can be cascaded. Two or more media converters can be chained in a link to achieve even greater distances. |
| Pause (IEEE 802.3x) | Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter is transparent to Pause frames. |
| VLAN | The media converter is transparent to 802.1Q VLAN tagged packets. |
| Duplex | Full and half duplex operation supported. |
| Jumbo Packets | Transparent to jumbo packets up to 10KB. |
| Remote Loopback | The media converter can perform a loopback on each 1000Base-X fiber interface. |