NPort 6610-32-48V

Details

The NPort® 6600 series of secure device servers is the right choice for applications that use large numbers of serial devices packed into a small space. If you're worried about security, you can rest assured with the NPort® 6600, since it supports DES, 3DES, and AES, the three most common standards for data encryption. Serial devices of any type can be connected to the NPort® 6600, and each serial port on the NPort® can be configured independently for RS-232, RS-422, or RS-485 transmission.

LCD Panel Makes Configuration Easy

The NPort® 6600 has a built-in LCD panel for configuration and selecting operation modes. The panel displays the server name, serial number, and IP address, and any of the device server's configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly.

Adjustable Resistor Values for RS-485 Communication

The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort®6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.

Documentation

• PDF Moxa NPort 6600 Series Data Sheet
• PDF Moxa NPort 6600 Series Installation Guide
• PDF Moxa NPort 6000 Series User's Manual

---




Ethernet Interface
Number of Ports	1
Speed	10/100 Mbps, auto MDI/MDIX
Connector	8-pin RJ45
Magnetic Isolation	1.5 KV built-in
ï Optical Fiber Interface (with network module)
Fiber Port	100BaseFX, SC connector
Distance	Multi-mode: 0 to 4 km, 1310 nm (62.5/125 µm, 500 MHz*km)  Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))
Min. TX Output	Multi-mode: -20 dBm  Single-mode: -5 dBm
Max. TX Output	Multi-mode: -10 dBm  Single-mode: 0 dBm
Sensitivity	Multi-mode: -34 to -30 dBm  Single-mode: -36 to -32 dBm
ï Serial Interface
Number of Ports	8, 16, or 32
Serial Standards	NPort 6610: RS-232  NPort 6650: RS-232/422/485
Connector	8-pin RJ45
RS-485 Data Direction Control	ADDC® (Automatic Data Direction Control)
Serial Line Protection	15 KV ESD protection for all signals
Console Port	Dedicated RS-232 console port on rear panel (8-pin RJ45)
ï Serial Communication Parameters
Data Bits	5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	None, Even, Odd, Space, Mark
Flow Control	RTS/CTS, DTR/DSR, XON/XOFF
Baudrate	50 bps to 921.6 Kbps (supports non-standard baudrates)
Pull High/Low Resistor for RS-485	1 KΩ, 150 KΩ
Terminator for RS-485	120 Ω
ï Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND
ï Memory Expansion Slot
Slot Type	SD socket (supports up to 2 GB)
ï Software
Network Protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE
Security Protocols	DES, 3DES, AES, SSH, SSL
Configuration Options	Web Console, Serial Console, Telnet Console, Windows Search Utility
Windows Real COM Drivers	Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers	SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
Linux Real TTY Drivers	Linux kernel 2.4.x, 2.6.x
Management	SNMP MIB-II
IP Routing	Static, RIP-I, RIP-II
ï Operation Modes
Standard	Real COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal, Reverse Telnet, Ethernet Modem, Printer, PPP, Disabled
Secure	Secure Real COM, Secure TCP Server, Secure TCP Client, Secure Pair Connection, SSH, Reverse SSH
ï Applications
Terminal Sessions	8 sessions per port
ï Physical Characteristics
Housing	Metal, IP30 protection
Weight	NPort 6600-8: 3460 g  NPort 6600-16: 3580 g  NPort 6600-32: 3600g
Dimensions	Without ears: 440 x 195 x 44 mm (17.32 x 7.68 x 1.73 in)  With ears: 480 x 195 x 44 mm (18.9 x 7.68 x 1.73 in)
ï Environmental Limits
Operating Temperature	Standard Models: 0 to 55∞C (32 to 131∞F)  Wide Temp. Models: -40 to 75∞C (-40 to 167∞F)
Storage Temperature	-40 to 75∞C (-40 to 167∞F)
Ambient Relative Humidity	5 to 95% (non-condensing)
ï Power Requirements
Input Voltage	AC Models: 100 to 240 VAC  DC Models: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
Power Consumption	AC Models: 285 mA @ 100 VAC, 190 mA @ 240 VAC  DC Models: 293 mA @ 48 VDC
Alarm Contact	Relay output with current carrying capacity of 1 A @ 24 VDC
Power Line Protection	1 KV burst (EN61000-4-4: EFT/B), 0.5 KV surge (EN61000-4-5)
ï Standards and Certifications
Safety	UL 60950-1, EN 60950-1
EMC	CE, FCC
EMI	EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS	EN 55024, EN 61000-4-2 (ESD) Level 2/3, EN 61000-4-3 (RS) Level 2, EN 61000-4-4 (EFT) Level 2, EN 61000-4-5 (Surge) Level 2, EN 61000-4-6 (CS) Level 2, EN 61000-4-8 Level 1, EN 61000-4-11
Freefall	IEC-68-2-6, IEC-68-2-34, IEC-68-2-32
Vibration	IEC-68-2-6, IEC-68-2-34
Green Product	RoHS, CRoHS, WEEE
ï Reliability
Alert Tools	Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger	Built-in WDT (watchdog timer)
MTBF (mean time between failures)	NPort 6610-8: 135,891 hrs NPort 6610-16: 102,373 hrs NPort 6610-32: 68,707 hrs NPort 6650-8: 135,370 hrs NPort 6650-16: 101,783 hrs NPort 6650-32: 68,177 hrs
ï Warranty
Warranty Period	5 years





Dimensions



 

Pin Assignment

Features

• Up to 32 ports for high density environments
• Non-standard baudrates supported with high precision
• Port buffers for storing serial data when the Ethernet is off-line
• Supports IPv6
• Ethernet redundancy (STP/RSTP/Turbo Ring) with network module
• Modular design for network expansion
• Secure data transmission