About This Item
Overview
Details
The UC-8410A Series embedded computers support a rich collection of communication interfaces, including 8 RS-232/422/485 serial ports, 3 Ethernet ports, 1 PCIe mini slot for a wireless module, 4 digital input channels, 4 digital output channels, 1 mSATA slot, and 2 USB 2.0 hosts.
The UC-8410A computer uses the Freescale Cortex-A7 dual-core 1 GHz RISC CPU. This powerful computing engine supports several useful communications functions, without generating too much heat. The built-in 1 GB SD card and 512 MB DDR3 SDRAM give you enough memory to run your application software, and the mSATA slot provides the flexibility of adding additional data storage. The UC-8410A comes with a variety of communication interaces, including serial ports, Ethernet ports, wireless communication slot, and digital input/output channels, making them ideal as communication platforms for industrial applications that require network and device communications.
The UC-8410A Series comes with Linux Debian 8 pre-installed to provide an open software operating system for software program development. This makes the UC-8410A computer an optimal solution for use with industrial applications, but at minimal cost and effort. In addition to the standard model, a -40 to 75∞C wide temperature model is also available for harsh industrial environments.
Documentation
PDF Data Sheet- PDF Quick Installation Guide
- Hardware User's Manual
- Freescale LS1021A Coretex-A7 1 GHz dual-core processor
- 512 MB DDR3 SDRAM
- 8 RS-232/422/485 serial ports
- 3 10/100/1000 Mbps Ethernet ports
- Wireless-enabled with PCIe mini slot
- 2 USB 2.0 hosts for mass storage devices
- DIN-rail or wall-mounting installation
- Robust, fanless design
- -40 to 75∞C wide temperature model available
- Ready-to-run Debian ARM 8
| ï Hardware Specifications | |
| ï Computer | |
| CPU | ARMv7 Cortex-A7 dual-core 1.2 GHz |
| USB | USB 2.0 hosts x 2, Type A connector |
| DRAM | 1 GB DDR3 SDRAM onboard |
| ï Storage | |
| Main Storage | 8 GB eMMC with OS pre-installed |
| Storage Expansion | 1 SD card slot, 1 mSATA slot |
| ï Other Peripherals (does not apply to "-NW" models) | |
| Expansion Slot | 1 Mini-PCIe socket w/ USB + PCIe signal |
| USIM | 1 USIM slot |
| Wireless SMA Interface | 2 SMA connectors |
| ï Ethernet Interface | |
| LAN | Auto-sensing 10/100/1000 Mbps ports (RJ45) x 3 |
| Magnetic Isolation Protection | 1.5 kV built-in |
| ï Serial Interface | |
| Serial Standards | RS-232/422/485 software-selectable ports (8-pin RJ45) x 8 |
| Console Port | RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1) |
| ï Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, XON/XOFF, ADDCÆ (automatic data direction control) for RS-485 |
| Baudrate | 50 bps to 115.2 kbps (supports nonstandard baudrates; see userís manual for details) |
| ï Serial Signals | |
| RS-232 | TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND |
| RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w | Data+, Data-, GND |
| ï Digital Input | |
| Input Channels | DI x 4 |
| Input Voltage | 0 to 30 VDC |
| Digital Input Levels for Dry Contacts |
ï Logic level 0: Close to GND
ï Logic level 1: Open |
| Digital Input Levels for Wet Contacts |
ï Logic level 0: +10 to +30 V (COM to DI)
ï Logic level 1: +3 V max. |
| Connector Type | 10-pin screw terminal block (4 points, COM, GND) |
| Isolation | 3 kV optical isolation |
| ï Digital Output | |
| Output Channels | 4, sink type |
| Output Current | Max. 200 mA per channel |
| On-State Voltage | 24 VDC nominal, open-drain to 30 V |
| Connector Type | 10-pin screw terminal block (4 points, GND) |
| Isolation | 3 kV optical isolation |
| ï LEDs | |
| System | Power, Ready, Storage, Diagnostic, Wireless signal strength |
| LAN | 100M/Link/Act x 3, 1000M/Link/Act x 3 (on connector) |
| Serial | TxD x 8, RxD x 8 (on connector) |
| Reset Button | Supports "Reset to Factory Default and System diagnostics" |
| ï Physical Characteristics | |
| Housing | SECC sheet metal (1 mm) |
| Weight | 1 kg (2.21 lb) |
| Dimensions | 200 x 120 x 48.6 mm (7.87 x 4.72 x 1.91 in) |
| Mounting | Wall mounting |
| ï Environmental Limits | |
| Operating Temperature |
Standard Models: -10 to 60∞C (14 to 140∞F)
Wide Temp. Models: -40 to 75∞C (-40 to 167∞F) |
| Storage Temperature |
Standard Models: -20 to 75∞C (-4 to 167∞F)
Wide Temp. Models: -40 to 85∞C (-40 to 185∞F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Anti-Vibration | 2 Grms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis |
| Anti-Shock | 20 g @ IEC-68-2-27, half sine wave, 11 ms |
| ï Power Requirements | |
| Input Voltage | 12 to 48 VDC (3-pin terminal block, V+, V-, SG) |
| Input Current | FeaturesRelated Products
|