About This Item
Overview
Details
ConnectPort X2 gateways benefit from the enhanced management capabilities offered by iDigi Manager Proô. This web-based device management system enables remote access and control of your Digi gateways.
The iDigi® Device Cloudô platform as a service provides integration of web and mobile applications via iDigi application programming interfaces (APIs), while providing the required reliability and security infrastructure to elastically scale.
ConnectPort X2 products feature an end-to-end development environment based on local customization via the iDigi® Dia framework, allowing for rapid M2M-specific application development on the industry standard Python scripting engine. Digi ESPô provides an IDE featuring device detection, debugging, compiling and downloading of iDigi Dia/Python code to Digi gateways.
Documentation
PDF Digi ConnectPort X2 Data Sheet- PDF Digi wireless routers and gateways feature comparison chart
| Specifications | ConnectPort® X2 Industrial | ConnectPort® X2 Commercial |
| General | ||
| Management | HTTP/HTTPS web interface, Password access control, IP service port control, Optional secure enterprise management via iDigi® Device Cloudô |
iDigi® Device Cloudô |
| Protocols | UDP/TCP, DHCP, SNMPv1 | UDP/TCP, DHCP |
| Total Memory | 8 MB Flash, 16 MB RAM | 8 MB RAM, 4 MB Flash (User-available memory varies by firmware and OS version) |
| LEDs | Ethernet status, Power, ZigBee link/activity | Ethernet status, Power, ZigBee link/activity |
| Security | SSL tunnels | SSL tunnels |
| Dimensions (L x W x H) |
5.50 in x 2.75 in x 1.13 in (13.9 cm x 7.0 cm x 2.9 cm); 0.44 lb (0.20 kg) |
2.75 in x 3.75 in x 1.25 in (7.0 cm x 9.5 cm x 3.2 cm); 0.20 lb (0.09 kg) |
| Antenna | ||
| XBee Antenna | 4" dipole; RP-SMA (Center pin - on device: male; on antenna: female) |
Internal |
| Wi-Fi (optional) | 4" dipole with 2' cable, tabletop mountable; RP-SMA (Center pin - on device: male; on antenna: female) |
N/A |
| Interfaces | ||
| RF | ZigBee, 802.15.4 | Smart Energy 1.0 certified ZigBee-PRO |
| Ethernet | ||
| Ports | 1 RJ-45 port | |
| Physical Layer | 10/100Base-T | |
| Data Rate and Mode | 10/100 Mbps (auto-sensing); Full or half duplex (auto-sensing) | |
| Wi-Fi (802.11b/g) | ||
| Frequency | 2.4 GHz | N/A |
| Data Rate | Up to 11 Mbps w/fallback | N/A |
| Modulation | DBPSK (1 Mbps), DQPSK (2 Mbps), CCK (11, 5.5 Mbps) | N/A |
| Transmit Power | 16 dBm typical | N/A |
| Receiver Sensitivity | -82 dBm @ 11 Mbps | N/A |
| Modes | Ad-hoc & AP Client Modes only; Access Point Mode not supported |
N/A |
| Power Requirements | ||
| Power Input | 9-30VDC | 5 VDC |
| Power Supply | 12 VDC power supply for 0∞ C to 60∞ C (32∞ F to 140∞ F) with locking barrel connector included; Extended temperature power supply available separately |
5 VDC power supply included |
| Power Consumption | Idle: 1.2 W, Max: 3.4 W | Idle: 1.2 W, Max: 3.4 W |
| Surge Protection (with included power supply) | 4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4 | N/A |
| Environmental | ||
| Operating Temperature | -30∞ C to +70∞ C (-22∞ F to +158∞ F) | 0∞ C to 40∞ C (32∞ F to 104∞ F) |
| Relative Humidity | 5% to 95% (non-condensing) | |
| Ethernet Isolation | 1500VAC min per IEEE802.3/ANSI X3.263 | |
| Regulatory Approvals | ||
| Safety | EN60950 | N/A |
| Emissions/Immunity | CE, FCC Part 15 (Class A) | N/A |
ConnectPort X2 - Side
ConnectPort X2 - Side
Features
- ZigBee to Ethernet/Wi-Fi IP gateways support numerous XBee protocols
- Multiple form factors and configuration options
- Commercial and industrial grade enclosures
- Easy development via iDigi® Dia and Python scripting as part of Digi ESPô IDE
- Available iDigi Application Development Services
- Secure, anywhere management using iDigi Manager Proô
