About This Item
Overview
Details
The ConnectPort X2e ZigBee to IP gateway provides low-cost IP networking of RF devices and sensor networks. Featuring an easy development environment, the gateway enables custom applications to run locally while interfacing across existing Ethernet/Wi-Fi networks for WAN connectivity to cloud-based software applications.
ConnectPort X2e products feature an end-to-end development environment based on the iDigi® Dia framework, allowing for rapid M2M-specific application development on the industry standard Python scripting engine. Digi ESPô provides an IDE featuring device detection, debugging, compiling and downloading of iDigi Dia/Python code to Digi gateways.
iDigi Manager Proô, a Digi-hosted remote management service, offers a platform for secure, scalable access to an unlimited number of remote assets. In addition, iDigi web services provide seamless integration from Digi gateways into customer back office applications.
Documentation
- PDF Connectport X2e Data Sheet
- PDF iDigi Device Cloud Data Sheet
- PDF iDigi Manager Pro Data Sheet
- PDF Smartlee Data Sheet
- PDF Connectport X2e Quick Start Guide
| Specifications | ConnectPort® X2e for Smart Energy |
| General | |
| Management | Secure enterprise management via iDigi® Device Cloudô |
| Protocols | UDP/TCP, DHCP |
| LEDs | Power, Network (LAN/WAN), ZigBee (HAN/PAN) |
| Security | SSL tunnels |
| ZigBee |
XBee® ZB SMT transmit power 6.3 mW (+8 dBm);
Receiver sensitivity (1% PER) -102 dBm |
|
Dimensions
(L x W x H) |
3 in x 3 in x 1 in (7.62 cm x 7.62 cm x 2.54 cm) |
| Weight | 0.15 lb (0.07 kg) |
| Development | |
| ZigBee Public Application Profile | Smart Energy 1.1 (Backwards compatible to 1.0) |
| Python Version | 2.7.1 |
|
Memory (User-available memory varies
by firmware and OS version) |
64 MB Ram, 128 MB Flash |
| Ethernet | |
| Ports | 1 RJ-45 port |
| Physical Layer | 10/100Base-T |
| Data Rate | 10/100 Mbps (auto-sensing) |
| Mode | Full or half duplex (auto-sensing) |
| Wi-Fi | |
| 802.11 | b/g/n |
| Data Rate | Up to 72.2 Mbps |
| Transmit Power | 18 dBm typical (varies by mode and channel) |
| Receiver Sensitivity | -87 dBm @ 11 Mbps |
| Modes | Ad-hoc & AP Client Modes only; Access Point Mode not supported |
| Power Requirements | |
| Power Input | 5 VDC |
| Power Supply | 5 VDC power supply with barrel connector included |
| Power Consumption | Typical: 1.2 W, Max: 2.5 W |
| Environmental | |
| Operating Temperature | 0∞ C to 40∞ C (32∞ F to 104∞ F) |
| Relative Humidity | 5% to 95% (non-condensing) |
| Ethernet Isolation | 500 VAC min per IEEE802.3/ANSI X3.263 |
| Regulatory Approvals | |
| Safety | EN60950 |
| Emissions/Immunity | CE, FCC Part 15 (Class B), IC, ETSI |
Features
- Easy-to-use Digi ESP development environment for open source Python or iDigi Device Integration Application (iDigi Dia)
- Linux-based OS offers adaptability to changing security and protocol standards
- Ethernet and Wi-Fi options for flexible broadband connectivity
- iDigi® Device Cloudô service manages connectivity, configuration and software upgrades as well as application integration via published APIs
- iDigi Device Cloud offers secure, scalable access to an unlimited number of remote assets and seamless web services integration from Digi gateways into customer back office applications
