About This Item
Overview
Details
The Digi XBee® 3 USB Adapter is an easy-to-use USB-to-Digi XBee Wireless Personal Area Network (WPAN) adapter, providing local connectivity to wireless networks. Simply plug the Digi XBee 3 USB Adapter into the USB port of a laptop or PC for instant access to a Digi XBee network and its devices. This compact, USB-powered wireless adapter enables local network configuration, diagnostics and device monitoring.
The Digi XBee 3 USB Adapter is part of Digiís XBee family of solutions, providing wireless communication between devices, including routers and gateways. The Digi XBee 3 USB Adapter uses Digiís XBee 3 module which lets you program the desired protocol using the Digi XCTU software platform. The adapter connects with DigiMesh, 802.15.4 and Zigbee network protocols.
Documentation
- PDF User Guide
| SPECIFICATIONS | DIGI XBEE 3 USB ADAPTER |
|---|---|
| PERFORMANCE | |
| OUTDOOR/RF LINE-OF-SIGHT RANGE* | Up to 1968 ft (600 m) |
| TRANSMIT POWER OUTPUT (NOMINAL 25∫ C) | 6.3 mW (8 dBm) |
| RF DATA RATE | 250 Kbps |
| SERIAL INTERFACE DATA RATE (SOFTWARE SELECTABLE) | 1200 bps - 921.6 Kbps |
| DIGI XBEE 3 RECEIVER SENSITIVITY | -103 dBm |
| POWER REQUIREMENTS | |
| SUPPLY VOLTAGE | 5V from PC USB port |
| TRANSMIT CURRENT | 45 mA |
| RECEIVE CURRENT | 26 mA |
| POWER-DOWN CURRENT | The Digi XBee 3 USB Adapter should not be put into sleep mode |
| GENERAL | |
| FREQUENCY BAND | 2.4 GHz ISM |
| LOCAL MANAGEMENT | WebUI (HTTP/HTTPS); CLI (Telnet, SSH, SMS) |
| DIMENSIONS (L x W x H) | 2.29 in x 0.80 in x 0.44 in (5.83 cm x 2.03 cm x 1.12 cm) |
| OPERATING TEMPERATURE | -40∫ C to +85∫ C |
| CONNECTOR | USB Type A |
| ANTENNA OPTIONS | Internal only |
| NETWORKING & SECURITY | |
| SUPPORTED NETWORK TOPOLOGIES | Zigbee Mesh, Point-to-Point, Point-to-Multipoint, Peer-to-Peer |
| NUMBER OF CHANNELS (SOFTWARE SELECTABLE) | 16 |
| ADDRESSING OPTIONS | PAN, Channel, Address |
| REGULATORY APPROVALS | |
| FCC PART 15.247 (USA) | Approved, contains: MCQ-XBEE3 |
| IC (CANADA) | Approved, contains IC: 1846A-XBEE3 |
| EUROPEAN COMPLIANCE | CE Marked |
Features
- Programmable to communicate with any of Digi's supported wireless protocols
- Provides connectivity to local Digi XBee networks from a laptop/PC
- Enables fast local commissioning of devices on the local network
- USB powered
- LEDs for UART traffic and network association
