About This Item
Overview
Details
Digi XBee and Digi XBee-PRO Zigbee RF modules provide cost effective wireless connectivity to electronic devices. They are interoperable with other Zigbee PRO feature set devices, including devices from other vendors*. Digi Zigbee Development Kits are the perfect way to begin Zigbee application development.Digi XBee and Digi XBee-PRO Zigbee modules are ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimizes integration with embedded microcontrollers, lowering development costs and reducing time to market.
Products in the Digi XBee family require little to no configuration or additional development. Programmable versions of the Digi XBee and Digi XBee-PRO Zigbee module make customizing applications easy. Programming directly on the module eliminates the need for a separate processor. Because the wireless software is isolated, applications can be developed with no risk to RF performance or security.
Digiís Zigbee compatible module is based on the Ember EM35x (EM357 and EM3587) system on chip (SoC) radio ICs from SiliconLabs, utilizing 32-bit ARM CortexTM M3 processor.
Documentation
PDF User Guide- Programmable versions with on-board microprocessor enable custom Zigbee application development
- Through-Hole and Surface Mount form factors enable flexible design options
- Link budgets of 110 dB for XBee and 119 dB for XBee-PRO
- Industry-leading sleep current
- Firmware upgrades via UART, SPI or over the air (OTA)
- Turnkey development available from Digi WDS
| Digi XBee S2C Zigbee | Digi XBee-PRO S2C Zigbee | Digi XBee S2D Zigbee | |
|---|---|---|---|
| PERFORMANCE | |||
| TRANSCEIVER CHIPSET | Silicon Labs EM357 SoC | Silicon Labs EM357 SoC | Silicon Labs EM3587 Soc |
| DATA RATE | RF 250 Kbps, Serial up to 1 Mbps | ||
| INDOOR/URBAN RANGE* | Up to 200 ft (60 m) | Up to 300 ft (90 m) | Up to 200 ft (60 m) |
| OUTDOOR/RF LINE-OF-SIGHT RANGE* | Up to 4000 ft (1200 m) | Up to 2 miles (3200 m) | Up to 4000 ft (1200 m) |
| TRANSMIT POWER | 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode | 63 mW (+18 dBm) | 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode |
| RECEIVER SENSITIVITY (1% PER) | -100 dBm / -102 dBm boost mode | -101 dBm | -100 dBm / -102 dBm boost mode |
| FEATURES | |||
| SERIAL DATA INTERFACE | UART, SPI | ||
| CONFIGURATION METHOD | API or AT commands, local or over-the-air (OTA) | ||
| FREQUENCY BAND | ISM 2.4 GHz | ||
| FORM FACTOR | Through-Hole, Surface Mount | Through-Hole, Surface Mount | Surface Mount |
| INTERFERENCE IMMUNITY | DSSS (Direct Sequence Spread Spectrum) | ||
| ADC INPUTS | (4) 10-bit ADC inputs | ||
| DIGITAL I/O | 15 | ||
| ANTENNA OPTIONS | Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire SMT: RF Pad, PCB Antenna, or U.FL Connector | ||
| OPERATING TEMPERATURE | -40∫ C to +85∫ C | ||
| DIMENSIONS (L X W X H) AND WEIGHT |
Through-Hole: 0.960 x 1.087 in (2.438 x 2.761 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) |
Through-Hole: 0.960 x 1.297 in (2.438 x 3.294 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) |
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) |
| PROGRAMMABILITY | |||
| MEMORY |
Standard: N/A
Programmable: 32 KB Flash/2 KB RAM |
Standard: N/A
Programmable: 32 KB Flash/2 KB RAM |
N/A |
| CPU/CLOCK SPEED |
Standard: N/A
Programmable: HCS08/up to 50.33 MHz |
Standard: N/A
Programmable: HCS08/up to 50.33 MHz |
N/A |
| NETWORKING AND SECURITY | |||
| PROTOCOL | Zigbee PRO 2007, HA-Ready with support for binding/multicasting | ||
| ENCRYPTION | 128-bit AES | ||
| RELIABLE PACKET DELIVERY | Retries/Acknowledgements | ||
| IDS | PAN ID and addresses, cluster IDs and endpoints (optional) | ||
| CHANNELS | 16 channels | 15 channels | 16 channels |
| POWER REQUIREMENTS | |||
| SUPPLY VOLTAGE | 2.1 to 3.6V | 2.7 to 3.6V | 2.1 to 3.6V |
| TRANSMIT CURRENT |
Standard: 33 mA @ 3.3 VDC/45 mA boost mode
Programmable: 47 mA @ 3.3 VDC/59 mA boost mode |
Standard: 120 mA @ 3.3 VDC
Programmable: 120 mA @ 3.3 VDC |
33 mA @ 3.3 VDC / 45 mA boost mode |
| RECEIVE CURRENT |
Standard: 28 mA @ 3.3 VDC/31 mA boost mode
Programmable: 42 mA @ 3.3 VDC/45 mA boost mode |
Standard: 31 mA @ 3.3 VDC
Programmable: 45 mA @ 3.3 VDC |
28 mA @ 3.3 VDC / 31 mA boost mode |
| POWER-DOWN CURRENT |
Standard: <1 μA @ 25∫ C
Programmable: 1.5 μA @ 25∫ C |
Standard: <1 μA @ 25∫ C
Programmable: 1.5 μA @ 25∫ C |
<3 μA at 25∫ C |
| REGULATORY APPROVALS | |||
| FCC, IC (NORTH AMERICA) | Yes | Yes | Yes |
| ETSI (EUROPE) | Yes | No | Yes |
| RCM (AUSTRALIA AND NEW ZEALAND) | Yes | Yes | No (Coming Soon) |